Abstract:A low temperature drift curvature-compensated complementary metal oxide semiconductor (CMOS) bandgap reference is proposed. A dual-differential-pair amplifier was employed to add compensation with a high-order term of TlnT (T is the thermodynamic temperature) to the traditional 1st-order compensated bandgap. To reduce the offset of the amplifier and noise of the bandgap reference, input differential metal oxide semiconductor field-effect transistors (MOSFETs) of large size were used in the amplifier and to keep a low quiescent current, these MOSFETs all work in weak inversion. The voltage reference’s temperature curvature has been further corrected by trimming a switched resistor network. The circuit delivers an output voltage of 3 V with a low dropout regulator (LDO). The chip was fabricated in Taiwan Semiconductor Manufacturing Company (TSMC)’s 0.35-μm CMOS process, and the temperature coefficient (TC) was measured to be only 2.1×10−6/°C over the temperature range of −40–125 °C after trimming. The power supply rejection (PSR) was −100 dB @ DC and the noise was 42 μV (rms) from 0.1 to 10 Hz.

A High Performance Differential Reference Voltage Generator Used in ADC

Design and Realization of a High Precision Low Temperature Coefficient Bandgap Voltage Reference

A current reference based on bandgap technology with wide input voltage range by using 0.18µm BCD process

A High Precision Circuit of Bandgap Voltage Reference

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

New Technique: A Low Drift Current Reference Based on PMOS Temperature Correction Technology.

A Novel High PSR Voltage Reference with Secondary Temperature Compensation

A Current-mode CMOS Bandgap Reference for Differential Signal Processing

A Differential Reference Used in High-Speed High-Resolution Pipelined ADC

Bandgap Voltage Reference Design with Enhanced Tolerance of Process Variations

A 1.9μvrms 7.7ppm/°c ADC Reference with 20ma Output Current and Single-Trim Inaccuracy of ±0.03%(3σ) from -40°C to 125°C

A 1.9V<sub>rms</sub> 7.7ppm/C ADC Reference with 20mA Output Current and Single-Trim Inaccuracy of 0.03%(3) from-40C to 125C

A Low Voltage High Precision CMOS Bandgap Reference

A Novel High-Precision Bandgap Reference with Differential Common-Gate Structure

A Design With High Order Compensation and low Temperature Drift Bandgap Reference Voltage Source

A 1.2 V,9 Ppm/℃ CMOS Bandgap Voltage Reference

A New Cmos Current Reference with High Order Temperature Compensation

A Bandgap Reference Design with Novel Curvature Compensation

A2.1-ppm/°C Current-Mode CMOS Bandgap Reference with Piecewise Curvature Compensation.

A 0.18μm CMOS band-gap voltage reference

Low Supply Bandgap Voltage Reference