Abstract:Switched reluctance motors (SRMs) have recently gained notable interest in industrial applications. Yet, their inherent torque ripple poses a significant impediment, limiting the adoption of SRM in high-performance applications. Instantaneous Torque Control (ITC) based on conventional Torque Sharing Function (TSF) is considered a promising technique for torque ripple reduction of SRMs at low speeds. However, the back electromotive force is increased with speed escalation, reducing torque tracking ability to its reference in the ITC based on conventional TSF, especially in the demagnetizing period. The high inductance value in this period opposes phase-current decaying, generating considerable torque ripple, making the ITC unsuitable at medium and high speeds. This paper proposes the indirect ITC based on an improved TSF to address the torque ripple over extended speed for SRM drive. The improved TSF relies on predicting the outgoing phase torque in the demagnetizing period and compensating for the difference between the predicting and reference torque in the next excitation phase by reshaping the incoming phase torque, minimizing the torque ripple. Moreover, simple analytical formulas are used to regulate the control angles to gain further improvements and extended speed. An accurate nonlinear motor model is created based on static magnetic characteristics estimated by the finite element analysis. Several simulated results are conducted to evaluate the effectiveness of the proposed controller. The proposed method offers higher torque ripple mitigation with the speed increase, decreasing the torque ripple by 10% to 45%. Furthermore, the proposed control reduces copper losses and enhances efficiency and torque/current ratio.

Direct Torque Control for Four Phase Switched Reluctance Motor

Investigation Of Direct Torque Control And Torque Sharing Function Strategy For Switched Reluctance Motor Applications

Multi-level Converter-Based Torque Sharing Function Control Strategy for Switched Reluctance Motors

Torque ripple minimization for switched reluctance motors by online modification of torque sharing function

Optimized Direct Instantaneous Torque Control for SRMs With Efficiency Improvement

A Novel Sequential Direct Torque Control Scheme for Seven-phase Induction Motors

A Sequential Direct Torque Control Scheme for Seven-Phase Induction Machines Based on Virtual Voltage Vectors

A Novel Boost Chopper Converter-Based Torque Sharing Function Control Strategy for Switched Reluctance Motors

Direct Torque Control of the Induction Motor Fed with a Three-Level Inverter

Optimum Design of Switched Reluctance Motor Based on Direct Instantaneous Torque Control

Research on Torque Ripple Minimization Strategy for Direct Torque Control of Induction Motors

Simulation of Switched Reluctance Motor with an Optimized Direct Torque Control Minimizing Torque Ripple

Direct Instantaneous Torque Control of Srm Based on New Flux Linkage Detection Method

A new full-speed range direct torque control strategy for induction machine

Torque Ripple Suppression Method of Switched Reluctance Motor Based on an Improved Torque Distribution Function

Direct Torque Control for Brushless DC Motors in Aerospace Applications with Single Sided Matrix Converters with Reduced Torque Ripple

A High Efficiency Torque Control Method of Switched Reluctance Motors Using Low Loss Commutation Control

Research on Direct Torque Control of Induction Machine Based on Torque Prediction

Comparative Investigation of Torque-ripple Suppression Control Strategies Based on Torque-sharing Function for Switched Reluctance Motor

Indirect Instantaneous Torque Control for Switched Reluctance Motor Based on Improved Torque Sharing Function

Torque Ripple Suppression of Switched Reluctance Motor Based on Fuzzy Indirect Instant Torque Control