Abstract:To suppress the torque ripple of switched reluctance motors (SRMs) and further enhance the efficiency of the motor, a torque sharing function (TSF) control strategy based on the ratio of torque per square ampere is proposed in this article. The control strategy takes into account the torque generation capacity of the motor, and a value function is proposed to optimize the TSF waveform to minimize copper consumption. Meanwhile, the torque online correction control strategy is proposed based on the proposed TSF control strategy in this article. Firstly, the total reference torque is allocated to each phase through the proposed TSF control strategy, and the minimum and maximum torque values of each phase are predicted through real-time phase currents. Subsequently, the range of the phase torque is obtained by the table lookup method and applied to torque online correction control. Finally, a drive signal is generated for the power converter, and realizing the actual instantaneous phase torque can track the target of the corrected reference phase torque. Detailed simulations and experiments are implemented in this article to assess the effectiveness of the proposed control strategy. The results show that in comparison to the cosine-type TSF control strategy, the proposed control strategy is capable of minimizing the torque ripple effectively, and further enhancing the efficiency of the motor.

A Novel Boost Chopper Converter-Based Torque Sharing Function Control Strategy for Switched Reluctance Motors

Multi-level Converter-Based Torque Sharing Function Control Strategy for Switched Reluctance Motors

Investigation Of Direct Torque Control And Torque Sharing Function Strategy For Switched Reluctance Motor Applications

Torque ripple minimization for switched reluctance motors by online modification of torque sharing function

Optimized Direct Instantaneous Torque Control for SRMs With Efficiency Improvement

OCTSF for torque ripple minimisation in SRMs

A Novel Dead-Beat Torque Control of Switched Reluctance Machines

Sliding-mode Torque Distribution Control of SRM

Torque Online Correction Control of Switched Reluctance Motor Based on Optimized Torque Sharing Function

Comparative Investigation of Torque-ripple Suppression Control Strategies Based on Torque-sharing Function for Switched Reluctance Motor

Torque Ripple Suppression Method of Switched Reluctance Motor Based on an Improved Torque Distribution Function

Study of Minimization of Torque Ripple in SRM Drives

Overviews of Control Strategies to Minimize Torque Ripple of Switched Reluctance Motor

Torque Ripple Reduction of Switched Reluctance Motor by Optimising Switch Angle Based on Analytical Modelling

Direct Instantaneous Torque Control of Switched Reluctance Motor with Five Level Converter

A High Efficiency Torque Control Method of Switched Reluctance Motors Using Low Loss Commutation Control

A Novel Radial Force Ripple Suppression Method of Switched Reluctance Machines Based on Force Sharing Function

A High-Performance Indirect Torque Control Strategy for Switched Reluctance Motor Drives

DSSRM Design with Multiple Pole Arcs Optimization for High Torque and Low Torque Ripple Applications

Simulation of Switched Reluctance Motor with an Optimized Direct Torque Control Minimizing Torque Ripple

A Novel Control Strategy of Switched Reluctance Motor Contributing to Low Vibrative Noise and Minimal Torque Ripple