Abstract:Enhancing the high temperature mechanical properties and the thermal stability of aluminum alloys are in urgent demand for the lightweight application scenarios (such as pistons, fan blades, crankshafts) working at elevated temperatures. The fabrication of aluminum matrix composites is a promising solution. In this work, TiB 2 nanoparticles were in-situ introduced to a typical heat resistant Al–Cu–Mg–Fe–Ni (Al2618) alloy matrix and subjected to hot extrusion. Microscopically, the extruded TiB 2 /Al composite exhibited refined and bimodal sized grain structure, which was stable after long-time thermal exposure associated with TiB 2 particle banding along the extrusion direction. The TiB 2 /Al composite showed an evident improvement in high temperature strength as well as the strength retention after long-time thermal exposure up to 300 °C, compared to the unreinforced alloy. The strengthening effect was remarkable especially at 200 °C with an increase of ~ 20% (60–70 MPa) in tensile strength and strength retention after thermal exposure but without the trade-off of ductility. The effects of TiB 2 particles on the temperature-dependent strengthening mechanisms and microstructure evolutions were investigated. This work inspires the design, processing and evaluation of novel high strength and heat resistant particle-reinforced aluminum matrix composites for the potential applications under elevated temperature service conditions.

Mechanical Properties and Microstructure of in Situ TiB_2-7055 Composites

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

Microstructure and Mechanical Properties of Aluminum Matrix Composites Reinforced With In-Situ TiB2 Particles

In Situ TiBw/Ti–6Al–4V Composites with Novel Reinforcement Architecture Fabricated by Reaction Hot Pressing

Microstructure and Mechanical Properties of In Situ TiB2/2024 Composites Fabricated by Powder Metallurgy

Investigation of Microstructural, Mechanical and Corrosion Properties of AA7010-TiB2 in-situ Metal Matrix Composite

Microstructural characterization and mechanical properties of (TiC+TiB)/TA15 composites prepared by an in-situ synthesis method

Microstructure, mechanical properties and strengthening mechanisms of Mg matrix composites reinforced with in situ nanosized TiB2 particles

Synthesis of Al7075/TiB2-Al2O3 In-Situ Hybrid Composite by Stir Casting Method

An Investigation of Microstructural Evolution, Tensile Properties and Work-Hardening Behavior of Nanosized TiB2/Al-Cu-Mn Composites

Microstructural evolution and mechanical properties of TiB2/2195 composites fabricated by ultrasonic-assisted in-situ casting

Microstructures and mechanical properties of in-situ TiB2/Al−xSi−0.3Mg composites

In-Situ Synthesis, Microstructure, and Mechanical Properties of TiB2-Reinforced Fe-Cr-Mn-Al Steel Matrix Composites Prepared by Spark Plasma Sintering

Processing, microstructure and ageing behavior of in-situ submicron TiB2 particles reinforced AZ91 Mg matrix composites

Mechanical and Microstructure Behavior of AA7050 Metal Matrix Composite Reinforced with TiO2/BN

Enhanced high temperature mechanical properties and heat resistance of an Al–Cu–Mg–Fe–Ni matrix composite reinforced with in-situ TiB2 particles

Enhancing strength-ductility synergy in nano-sized TiB 2 /Al composite via rapid solidification and thermo-mechanical processing

Microstructure, mechanical properties and strengthening mechanism of in-situ synthesized TiC/6061 nanocomposites

Influence of In Situ Titanium Diboride Particulate Reinforcement on Mechanical Properties of Aluminum–Silicon Based Metal Matrix Composites

High fatigue performance and microscopic mechanisms of in-situ TiB 2 /7050Al composite at different temperatures