Abstract:This article presents a new adaptive vision-based method (AVBM) of performing automatic detection for rotor balancing, and the online implementation proved that the method achieved rapid real-time optimization of system balancing configuration for a rotor dynamic balance machine. The proposed AVBM integrated 3D sensors and dynamic balancing platform using 3D computer vision technique and dynamic balance algorithm to improve the efficiency of rotor dynamic balancing. AVBM applied 3D ToF sensors on active rotor dynamic balance machines to grab 3D point cloud of rotor shaft and balance sprues. By 3D depth data, the background noise can be removed to detect the positions of shaft center, key phasor and balance sprues of rotor automatically. After combining with unbalance vector from dynamic balancing machine, the AVBM system calculated the optimal balance configuration by the vector analysis algorithm. Compares to conventional methods, conventional rotor dynamic balancing process relies on technicians to mount washers on particular balance sprues based on their experience, therefore uncertainty causes productivity decline. Experiments in industrial examples showed that the proposed AVBM required fewer rounds to achieve acceptance, whereas the conventional industrial rotor balancing method performed by operators required more than three rounds in average. Consider the overall dynamic balancing process for the motor, the processing time required for each motor without AVBM was 348.9 seconds, and the daily rotor balancing count of each dynamic balancing machine was 83. The processing time with AVBM was shortened from 348.9 to 283.9 seconds, the daily rotor balancing count had increased from 83 to 101, and the production improvement had reached 22 %. That is, the proposed AVBM can accurately analyze the dynamic balance and greatly reduce the redundant dynamic balance operations. The main advantage of the proposed AVBM over conventional methods is its eff-ciency, effectiveness and robustness in online optimization of rotor dynamic balance.

Pneumatic Liquid Online Automatic Balancing System for Rotating Machinery

Rigid Rotor Dynamic Balancing by Two-Plane Correction with the Influence Coefficient Method

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

Design and Implementation of Automatic Balancing Machine for Pump Impeller

Research on key technologies of automated balancing machines

Rigid Rotor Dynamic Balancing with the Influence Coefficient Method

The Design Study of Single Plane Vertical Hard Bearing Dynamic Balancing Machine

Study of Automatic Dynamic Balancing System for Engine Crankshaft

Flow Field Simulation and Parameter Analysis of Hydraulic Unbalanced Bionic Self-recovery Actuator for Rotary Equipment

The Study of an On-line Automatic Dynamic Balancing System and Its Dynamic Balancing Method when Used on a Flexible Rotor

On-line Unbalance Identification of Flexible Rotor System

Non-whole beat correlation method for the identification of an unbalance response of a dual-rotor system with a slight rotating speed difference

The Inertial Disturbances of Fluid Movement in the Chamber of a Liquid Autobalancer

A uniform control method for imbalance compensation and automation balancing in active magnetic bearing-rotor systems

Research on the Field Dynamic Balancing Technology and Instrument for a High Speed Cantilever Rotor

Auto balance of active magnetic bearings for rotor support system by means of unbalance identification

Online unbalance compensation of a maglev rotor with two active magnetic bearings based on the LMS algorithm and the influence coefficient method

Design of the Control System of Adaptive Balancing Device Based on PLC

Adaptive Vision-Based Method for Rotor Dynamic Balance System

Innovative design and experimental validation of dynamic balance in rotary compressors based on particle damping energy dissipation technology

Development and Research on the Intellectual Instrument of Field Whole-Machine Balancing for Air-blowers