Calibration Methods for an On-Line Atmospheric Mercury Analyzer Using a Permeation Tube

Limin Zeng

2011-01-01

Abstract:In order to calibrate an on-line atmospheric mercury analyzer automatically,a calibration module including three calibration methods was realized using the commercial Dynacal permeation device for which a thermostat(precision of temperature control was 0.1℃)was designed.The on-line atmospheric mercury analyzer developed by a PKU group was used to test the calibration methods.①Dynamic volumetric method:the same as the conventional permeation tube method,mercury with different concentrations(1~99 ng·m-3)was generated by changing the flow rates of the diluent gas(1~5 L,precision is 20 mL).A good linearity of the working curve(R2=0.9968)was achieved.②Time adjustment with a fixed concentration:the concentration of generating mercury could be comparatively fixed,and different sampling times were set to achieve different enrichment amounts,then the standard curve was established(R2=0.9968).③Time adjustment with zero-air supply:zero air could be supplied to achieve the sample volume without diluents while gas flow of the permeation tube was held constant.The concentration gradient was achieved by changing sample time(R2=0.9972).Method 1 is suitable for all atmospheric mercury analyzers.Methods 2 and 3 could also be used if the analyzer has a pre-enrichment function and different concentrations do not affect enrichment efficiency.The results of the three calibration methods were in agreement(the overall slope of the regression line had no significant difference).Calibration by generating different concentration mercury vapor was most equivalent to ambient environment,while methods through time adjustment were faster.In general,the low cost calibration module was stable and convenient to operate.