Abstract:This paper presents the design and characteristics of a front-end readout system for silicon sensors used in nuclear spectroscopy studies. Furthermore, the study proposes circuit topologies that combine gain-boosting and class-AB techniques featuring a good performance regarding gain, accuracy, speed, linearity, and power consumption, meeting the stringent requirements of deep submicrometer CMOS technologies. The readout channel comprises a charge-sensitive amplifier with a tunable discharge time, pole-zero cancellation circuit, and first-order unipolar shaper with a peaking time of 90 ns. The building blocks are made up of single-stage op-amps, thus not requiring compensation. Furthermore, the circuit is optimized for a detector capacitance of 5 pF, and the noise performance is discussed. Experimental results in a 180 nm CMOS process and a supply voltage of ±0.9 V validate the designed front-end channel. The total area of the chip obtained was 0.028 mm 2 . The conversion gain was 3.1 mV/fC, and the system maintained linearity up to an input charge range of 150 fC with a maximum output swing of 460 mV and recovered to the baseline within 400 ns. The compact design and the power consumption of only 1.97 mW provided a feasible solution for current radiation detectors coupled to many highly dense electronic channels.

Design and Application of a Charge-Sensitive Preamplifiers with Silicon Photo-Diodes in TEXONO

Design of a Preamplifier for Silicon Detector Redout Experiment

Design and preliminary test results of the charge sensitive amplifier for gain-less charge readout in high-pressure TPC

Design of Low Noise CMOS Charge Sensitive Amplifier ASIC

Design and test results of a low-noise readout ASIC for pixelated CdZnTe detectors

A 48_channle charge sensitive preamplifier for silicon strip array detector system

A Modified Design Method of Noise Optimization for CMOS Charge Sensitive Preamplifier

High Time Resolution, Low-Noise, Power-Efficient, Charge-Sensitive Amplifier in 40 nm Technology

Design and Experimental Validation of an Integrated Multichannel Charge Amplifier for Solid-State Detectors With Innovative Spectroscopic Range Booster

Low-noise CMOS Charge-Sensitive Preamplifier

Design and Performance of a High-Speed and Low-Noise Preamplifier for SiPM

Design of A Low Noise Readout Asic for Cdznte Detector

Development Of A Low Noise Readout Asic For Czt Detectors For Gamma-Ray Spectroscopy Applications

Charge Sensitive Preamplifier Design for APD Detection System of Laser Pulse

Design of Pre-Amplifiers for Photoelectric Detector

Application of a pre-amplifier in quartz enhanced photo-acoustic absorption spectrum

A Low Noise and Wide Dynamic Range Preamplifier for HPGe Detectors

Design and Test Results of A Low-Noise Readout Integrated Circuit for High-Energy Particle Detectors

Simple power-efficient preamplifier-shaper channel for readout interface of silicon detectors

Design and Fabrication of a Low-Noise CMOS Charge Sensitive Amplifier

Particle Detector Readout Integrated Circuit of 0.18μm Technology with 164 E Equivalent Noise Charge