Abstract:The incentive to save energy in heat exchangers has led to enhanced thermal performance in ducted flows, achieved via inserts designed to increase the heat transfer efficiency and efficacy. We introduce a novel approach using cross and X stripe inserts, roughened by 90° and 45° ribs, to enhance the structural integrity and heat transfer rate of the duct. Additionally, the incorporation of edged notches aims to improve aerothermal performance by directing flow traction away from the recirculating cell behind a rib, thereby reducing the drag. Utilizing the infrared thermography method, this research quantifies the full-field Nusselt number distributions for 34 enhanced ducts at Reynolds numbers 5,000–25,000. The outcomes of flow simulations elucidate the underlying mechanisms of aerothermal performance enhancement afforded by these inserts. These enhancements result from the combined effects of increased turbulence intensity, fluid mixing, and rib-induced multicellular vortices, which improve the synergy between fluid velocity and temperature gradient vectors, thereby optimizing heat transfer. Quantitatively, the Nusselt numbers (friction factors) for ducts with cross or X ribbed stripes increase significantly. For cross stripes, the ranges increase by 1.25–3.17 times (3.14–21.75 for friction factors), and for X stripes, 1.29–3.39 times (6.58–43.41 for friction factors), compared with the Dittus–Boelter (Blasius) standards. Notably, the aerothermal performance index for ducts featuring notched cross stripes with 45° ribs and a rib pitch-to-height ratio of 10 reaches 1.47 to 1.11, though this decreases with increasing Reynolds number. Furthermore, the study presents empirical correlations to assess the average Nusselt number and friction factor in a square duct equipped with either cross or X ribbed stripes.

Heat Transfer Enhancement Performance of a Tube Fitted with Rotors

Heat Transfer And Pressure Drop In Tubes Fitted With Grooved Lobe Rotor-Assembled Strands

Experimental investigation of heat transfer and friction factor in tubes fitted with regularly spaced rotor strands

Internal Flow Analysis of a Heat Transfer Enhanced Tube with a Segmented Twisted Tape Insert

Effects of Geometrical Parameters on Heat Transfer Enhancement in V-Spirally Corrugated Tube

Numerical study and mechanism analysis of heat transfer in a helical tube enhanced by sinusoidal pulsating flow combined with an annular corrugated structure

Heat transfer enhancement by inserting a radiation enhancement plate in turbine blade internal cooling channel

Enhancement Mechanisms for Single-Phase Turbulent Heat Transfer in Micro-Fin Tubes

Numerical study on influence of structural parameters of spiral rotor internal insert on heat transfer

Improvement of tube heat exchanger performance with perforated ring inserts, tube rotation and using nanofluids

Turbulent flow and heat transfer in discrete double inclined ribs tube

Numerical study on enhanced heat transfer and friction factor characteristics of helical bead-groove tube

Heat Transfer Augmentation and Entropy Generation Analysis of a Helically Coiled Tube with Internal Longitudinal Fins

Aerothermal performance improvement by cross and X ribbed stripes

Heat transfer and flow features of a Bifacial-enhanced U channel

Turbulent flow and heat transfer in a new type of internally torsion-ribbed helical tube

Thermal performance assessment of self-rotating twisted tapes and Al2O3 nanoparticle in a circular pipe

A numerical study on the flow over a novel tube for heat-transfer enhancement with a linear Eddy-viscosity model

Evaluation of Heat Transfer Enhancement on Rotational Gas Turbine Blade Internal Cooling Channel with Dimpled Surface

Numerical Study of Thermal-Hydraulic Performance Improvement of Enhanced Surface Tubes

Research on thermohydraulic performance of the petal-type vortex generator inserted tube heat exchanger