Abstract:The present study numerically examines heat transfer and flow in circular tubes fitted with dimpled twisted tape inserts, and Al2O3-water nanofluid is employed. Considering the effects of dimples, protrusions, nanofluid volume fraction a and nanoparticle" diameter tip, the discussion and analysis on heat transfer, flow characteristics, turbulence kinetic energy TICE, thermal property, entropy generation and maximum local wall temperature T-max are detailedly provided. The results show that dimple side and protrusion side both realize great heat transfer enhancement, and dimple side behaves better compared with protrusion side. Utilization of dimples leads to an increase by 25.53% in convective heat transfer coefficient It at most compared with smooth tape. Heat transfer performance is greatly improved on both tape wall and tube wall owing to disturbance to flow structures. The overall TILE level significantly rises especially close to the core flow region when dimples are adopted, and overall swirl flow intensity greatly increase, further resulting in enhancement of turbulent mixing and heat transfer. Remarkable decline in average heat transfer entropy generation rate S-ah is identified, accompanied by slight rise in average friction entropy generation rate S-af, where average total entropy generation rate S-a inclines by 29.10% at most in comparison with smooth tape. Besides, the employment of nanofluids results in great improvement of heat transfer, with further enhanced effect when alpha increases, accompanied by slight growth in resistance. A maximum increase by 58.96% in h is identified compared with basefluid case, and it is quite helpful that in this case the maximum rise in friction factor is only 5.05%. The wall temperature distribution is greatly improved using nanofluid, and nanofluid case provides markedly improved thermal conductivity distribution in spite of slight growth in dynamic viscosity. The heat transfer in recirculation-caused low heat transfer regions is further promoted through nanofluids when dimple technique is adopted. Utilization of nanofluid brings about a significant reduction in S-ah, the effect of which is further promoted by a rising cc, with a slight increase in S-af where S-a is reduced by 28.89% at most. The T-max greatly declines using nanofluids with further enhanced effect when alpha ascends. Furthermore, utilization of smaller d(p) gives rise to significant heat transfer enhancement compared with the larger one, with extremely mild resistance increase. Lower S-a and lower T-max are both realized when smaller d(p) is used, and the effect of d(p) reaches an extremely low level when it exceeds 40 nm. (C) 2017 Elsevier Ltd. All rights reserved.

Thermal performance assessment of self-rotating twisted tapes and Al2O3 nanoparticle in a circular pipe

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

Numerical Investigation on Heat Transfer Performance and Flow Characteristics in Circular Tubes with Dimpled Twisted Tapes Using Al 2 O 3 -Water Nanofluid

Heat transfer assessment of turbulent nanofluid flow in a circular pipe fitted with elliptical-cut twisted tape inserts

Thermal-hydraulic characteristic of short-length self-rotating twisted tapes in a circular tube

Internal Flow Analysis of a Heat Transfer Enhanced Tube with a Segmented Twisted Tape Insert

Thermal analysis of nanofluids flow in a double pipe heat exchanger with twisted tapes insert in both sides

Friction Factor and Heat Transfer of Nanofluid in the Turbulent Flow Through a 90° Bend

Evaluation of thermal performance factor by hybrid nanofluid and twisted tape inserts in heat exchanger

Analysis of heat transfer characteristics and entransy evaluation of high viscosity fluid in a novel twisted tube

Visualization experiment and thermal-hydraulic behaviour of assembled self-rotating twisted tape in double-pipe heat exchangers

Numerical study on the thermal performance of the shell and tube heat exchanger using twisted tubes and Al2O3 nanoparticles

Evaluation of aerothermal performance of a round tube with regularly-spaced multi-channel twisted tape elements installed

Thermal performance augmentation in a pipe employing hybrid nanofluid and a plate as turbulator with V-shaped double-winglet ribs

Enhancing thermal performance: a sophisticated analysis of CuO-water nanofluids and twisted tape inserts in tubular heat exchangers-a numerical study

Experimental Study on Compound Heat Transfer Enhancement of Transverse Corrugated Tube with Full Length Twisted Tapes

Numerical Analysis on Heat Transfer Enhancement of Sco2 in the Tube with Twisted Tape

Experimental Study on the Heat Transfer Enhancement by the Combination of Transverse Groove Tube and Twisted Tape Inserts

Numerical Study on Flow Structure and Heat Transfer in a Circular Tube Integrated with Novel Anchor Shaped Inserts

Effect of twist ratio on the thermal-hydraulic behavior of an aluminum oxide/cupric oxide nanofluid heat exchanger