Abstract:The IC lead frame is an essential component in semiconductor packaging, primarily composed of a nickel (Ni)–copper (Cu) alloy in which Ni is electroplated onto a Cu substrate. In this study, synergistic solvent extraction using a binary extractant containing LIX984N and Cyanex302, followed by two-stage selective stripping using sulfuric acid (H2SO4) and nitric acid (HNO3) as the stripping agent, was employed to separate and recover Cu and Ni from the leachate of an IC lead frame. The results indicated that under the optimal conditions of synergistic solvent extraction with an extraction pH value of 1, an extractant concentration of 0.015 M LIX984N + 0.0375 M Cyanex302, an extraction aqueous/organic (A/O) ratio of 1:1, and an extraction time of 5 min, the extraction efficiencies for Cu and Ni were 99.8% and 1.17%, respectively. The distribution ratios were DCu 999 and DNi 0.012, resulting in a separation factor of 83,250. In addition, the separation factor was much higher than that of using individual extractant of LIX984N (6208.3) or Cyanex302 (22,185.2). Subsequently, under optimal first-stage stripping conditions, using 0.05 M H2SO4 at a stripping organic/aqueous (O/A) ratio of 1:1, and with a stripping time of 3 min, a stripping efficiency of 99.9% for Ni was achieved. Next, under optimal second-stage stripping conditions, using 5 M HNO3 at a stripping O/A ratio of 2:1, and with a striping time of 3 min, a stripping efficiency of 99.9% for Cu was achieved. Finally, sodium hydroxide (NaOH) was added to the respective stripping solutions to precipitate Ni and Cu ions, followed by calcination treatment for the precipitates to obtain NiO and CuO, respectively. The purity of the former was 99.74% and that of the latter was 99.82%. The results demonstrate that synergistic solvent extraction using a binary extractant containing LIX984N and Cyanex302 can almost entirely extract Cu in the leachate of an IC lead frame at a lower extraction pH and a lower extractant concentration, thus reducing the co-extraction of Ni. In addition, less co-extracted Ni in the organic phase can be selectively stripped using dilute H2SO4, thus reducing the co-stripping of Cu. Hence, the effective separation and recovery of Cu and Ni in IC lead frame leachate can be achieved, which contributes to improving the sustainability of natural resources.

Separation and Recovery of Cobalt and Nickel from Electro-solution of Co-Ni Waste

A Comparative Study Of Nickel(Ii) Removal From Electroplating Wastewater By Pre-Precipitation Combined With Fenton-Precipitation Or Fenton-Like-Precipitation

Separation of nickel, cobalt and magnesium from the spent MH-NI and CD -NI battery anode materials

Separation of cobalt and nickel via solvent extraction with Cyanex-272: Batch experiments and comparison of mixer-settlers and an agitated column as contactors for continuous counter-current extraction

Separation of cobalt and nickel from chloride leach solution of nickel laterite ore by solvent extraction

Simultaneous extraction and separation of Ni(OH) 2 , Ni powder and Ni plate from waste nickel-cobalt scrap in one spot: Control sequence of electrical reduction

Hydrometallurgical Process Of Waste Cadmiumi-Nickel Cells And Cathode Materials From Battery Plants

Recovery of nickel and iron from ferronickel powder and high nickel matte via the atmospheric leaching-hematite precipitation process

Recovery of Nickel, Copper and Cobalt from Low-Grade Ni–Cu Sulfide Tailings

Recovery of Ni, Co and Rare Earths from Spent Ni–metal Hydride Batteries and Preparation of Spherical Ni(OH)2

Comprehensive Recovery of Copper-Nickel Alloy Scrap

Recovery of Nickel and Cobalt Metal Powders from the Leaching Solution of Spent Lithium-Ion Battery by Solvent Extraction and Chemical Reduction

Efficient Removal of Lead Impurity for the Purification and Recycling of Nickel from Secondary Sources Based on Ball-Milling Activated CaCO3

Efficient separation and recovery of Co and Ni from ammonium sulfate roasting‐water leaching solutions of oceanic cobalt‐rich crusts by sulfide precipitation and P507–Cyanex 272 synergistic extraction

Simultaneous Recovery of Nickel and Cobalt from Aqueous Solutions Using Complexation-Ultrafiltration Process

Implementation of an innovative hybrid process based on electrodeionization for nickel and cobalt separation from synthetic pregnant leach solution

Recovery of Pure Co(II) and Ni(II) Solutions from Synthetic Sulfate Leach Liquor of Laterite Ores by Precipitation and Solvent Extraction

Sequential separation of critical metals from lithium-ion batteries based on deep eutectic solvent and electrodeposition

Separation and Recovery of Nickel Cobalt Manganese Lithium from Waste Ternary Lithium-Ion Batteries

Removal of Co(II) and various metal ions from the residue of the zinc plant through solvent extraction using both acid and neutral extractants

Separation and Recovery of Copper and Nickel in the Leachate of a Waste IC Lead Frame through Synergistic Solvent Extraction Using a Binary Extractant Containing LIX984N and Cyanex302 Followed by Selective Stripping