Abstract:The pressure-volume diagram (p-V diagram) is an established method for analyzing the thermodynamic process in the cylinder of a reciprocating compressor as well as the fault of its core components including valves. The failure of suction/discharge valves is the most common cause of unscheduled shutdowns, and undetected failure may lead to catastrophic accidents. Although researchers have investigated fault classification by various estimation techniques and case studies, few have looked deeper into the barriers and pathways to realize the level determination of faults. The initial stage of valve failure is characterized in the form of mild leakage; if this is identified at this period, more serious accidents can be prevented. This study proposes a fault diagnosis and severity estimation method of the reciprocating compressor valve by virtue of features extracted from the p-V diagram. Four-dimensional characteristic variables consisting of the pressure ratio, process angle coefficient, area coefficient, and process index coefficient are extracted from the p-V diagram. Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA) were applied to establish the diagnostic model, where PCA realizes feature amplification and projection, then LDA implements feature dimensionality reduction and failure prediction. The method was validated by the diagnosis of various levels of severity of valve leakage in a reciprocating compressor, and further, applied in the diagnosis of two actual faults: Mild leakage caused by the cracked valve plate in a reciprocating compressor, and serious leakage caused by the deformed valve in a hydraulically driven piston compressor for a hydrogen refueling station (HRS).

The Intake and Exhaust Valves' Failure Analysis of AIREL Associated Gas Compressor

Valve Dynamic Characteristic and Stress Analysis of Reciprocating Compressor Under Stepless Capacity Regulation

Valve Plate Roll Analysis on Stepless Capacity Regulation for Reciprocating Compressor

Rupture Failure Analysis of the Executing Fork of the Flow Regulating Apparatus in a Partial Stroke Press-Off Inlet Valve

Analysis and Diagnosis on Internal Leakage in Electro-Hydraulic Quick-Control Regulating System of Steam Turbine

Experimental investigation of the fault diagnosis of typical faults in reciprocating compressor valves

Experiments On Fault Analysis About Valves Of 2d12 Reciprocating Compressors

The Common Faults and Analysis of Hydrogen Compressor

Finite element analysis and topology optimization of direct-drive compressor valve

Analysis on an Accident of Blade Split of Some Air Compressor

Numerical and Experimental Investigations on the Failure Mechanism of the Suction Valve in the Refrigerator Compressor under Unconventional Conditions

Analysis and Solutions of Three Combined Test Chamber's Malfunction Based on the Working Process

Experiment on Fault Diagnosis of Air Compressor Ring Valve Leakage Using Acoustic Emission

An Experimental Research and Analysis of Control Valve in Variable Displacement Compressor

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

A p-V Diagram Based Fault Identification for Compressor Valve by Means of Linear Discrimination Analysis

Research on the Analysis of Wear Mechanism and Improvement of the Two-way Limit Valve

Failure analysis on synergistic effect of erosion and corrosion on failed fittings in specialty chemical plant. Part II: Control valve

Survey of Failure of Large Process Compressor in Chinese and Failure Prevention Countermeasure

Analysis of Some Typical Faults of Hydraulic System of Turbofan Jet Fuel-supplying Governing System

Investigation on Ring Valve Motion and Impact Stress in Reciprocating Compressors