Abstract:High-pressure gas storage is an important means of hydrogen application in the transportation industry, especially in hydrogen refuelling stations. The hydrogen compressor is the most crucial dynamic component for highpressure gas storage in hydrogen refuelling stations. An effective control system is required to guarantee the compressor operates safely and efficiently, which is based on the safe and efficient monitoring of the operating condition of the compressor. However, significantly limited literature has been provided for the hydraulic -driven piston compressor. In this paper, a non-destructive testing method for monitoring the dynamic pressure by strain gauge in the hydraulic -driven piston compressor is proposed. The relationship between the strain of the cylinder head and key operating parameters is obtained through finite element analysis, based on which the optimal location for the pressure monitoring is identified. The proposed non-destructive testing method is validated by experiments of a two -stage hydraulic -driven piston compressor. The strain analysis indicates that the circumferential strain in the cylinder head has a good linear relationship with the in -cylinder gas pressure with a value above 99.6 %. The deformation of the four monitoring positions is almost unchanged with a maximum deviation of 0.5 % under different piston positions. A high uniformity of the circumferential strain of the cylinder head is observed from the analysis. Experimental results indicate that the proposed non-destructive monitoring method is effective in obtaining the dynamic pressure in -cylinder during the compressor operation with a maximum deviation of 5.13 % and an average deviation below 2.01 %.

The Common Faults and Analysis of Hydrogen Compressor

Numerical Study of Hydrogen Leakage and Explosion in Hydrogen Refueling Station with Large Volume Hydrogen Storage Vessels

Survey of Failure of Large Process Compressor in Chinese and Failure Prevention Countermeasure

Insights into electrochemical hydrogen compressor operating parameters and membrane electrode assembly degradation mechanisms

Fracture Mechanism and Fault Evolution of Piston Rod in Hydrogen Reciprocating Compressor

The Intake and Exhaust Valves' Failure Analysis of AIREL Associated Gas Compressor

Simulation and Analysis of Leakage and Explosion Accident in Liquid Hydrogen Hydrogenation Station

Experimental Investigation on the Hydraulic-Driven Piston Compressor for Hydrogen under Varied Operating Conditions

Investigation on High-Pressure Metal Hydride Hydrogen Compressors

Safety of hydrogen storage and transportation: An overview on mechanisms, techniques, and challenges

A Non-Destructive Fault Diagnosis Method for a Diaphragm Compressor in the Hydrogen Refueling Station

Analysis on an Accident of Blade Split of Some Air Compressor

Research on Prognostic Health Management Technique and System for Large Scale Compressor Fleet

Diagnosis Method to Identify Diaphragm State of Diaphragm Compressors for Hydrogen Refueling Stations Based on Dynamic Oil Pressure

Analysis and treatment of common vibration troubles of turbine compressor

Theoretical Study of the Dynamic Characteristics of a Self-Commutating Liquid Piston Hydrogen Compressor

Hydrogen safety: An obstacle that must be overcome on the road towards future hydrogen economy

Recent Advances in Hydrogen Process Safety: Deflagration Behaviors and Explosion Mitigation Strategies

Application of HAZOP in hazard identification of ammonia converter

Strain Analysis and Non-Destructive Monitoring of the Two-Stage Hydraulic-Driven Piston Compressor for Hydrogen Storage

Comprehensive safety assessment of a hydrogen liquefaction system based on an integrated system-theoretic process analysis (STPA) and best-worst method (BWM)