Abstract:The global trend toward decarbonization is inspiring researchers to search for low or even zero carbon fuels for internal combustion engines. Ammonia (NH3) is considered a potential alternative fuel to conventional gasoline and diesel without carbon emissions. Although it is not an ideal fuel for use in engines due to its poor combustion properties, the use of hydrogen (H-2), which has low ignition energy and can be decomposed from ammonia, as a combustion promoter can enhance its suitability for engine applications. A careful literature review indicates that the relatively few existing studies on NH3/H-2 engines and the uncertainty of the NH3/H-2 chemistry under typical high-temperature and high-pressure engine environments limit the determination of the ammonia-tohydrogen ratio. However, this question is important when converting an existing engine to ammonia operation because it is related to compression ratio determination, aftertreatment design, ECU mapping, and on-board hydrogen production rate requirements. In other words, this outstanding question would affect the simultaneous design of other accessory systems and the development of ammonia engines. To increase the knowledge of the hydrogen concentration in the fuel feed of ammonia fueled engines in the engine community, this study discusses this question from the perspective of laminar flame speed (LFS), because it is closely related to reactivity, diffusivity, and exothermicity, which is a macroscopic parameter of premixed combustion and directly affects the efficiency and emissions of spark ignition engines. Specifically, the required proportion of hydrogen blended with ammonia is determined by comparing the NH3/H-2 reaction time scale with the millisecond combustion time scale in typical engines. The results show that high temperature enhances the LFS of ammonia, hydrogen and their mixtures, while pressure has an inhibitory effect. In addition, increasing the compression ratio and avoiding fuel-lean operation are effective ways to improve the performance of ammonia combustion with less hydrogen. Considering the high required hydrogen consumption rate and the full load conditions that guarantee high combustion efficiency, off-road application may be a suitable scenario for ammonia-hydrogen engines. Before applying ammonia to automobiles, the technology for onboard hydrogen production should be effectively developed.

Application of HAZOP in hazard identification of ammonia converter

The Application Research of HAZOP in Hazard Identification of Titanate Production Process

Hazard Identification on the Process of High-Level Liquid Waste Concentration and Denitration in Spent Fuel Reprocessing by HAZOP

Chemical Laboratory Hazardous Chemical Management Based on HAZOP

Sdg-Based Hazop Analysis of Operating Mistakes for Pvc Process

Dynamic simulation‐based quantitative hazard and operability process hazard analysis for a hydrocracking unit

Research on Application of Hazard Analysis and Control Technology for Integrated Process

Intelligent HAZOP analysis method based on data mining

Misoperation monitoring and early warning during startup and shutdown of petrochemical units

The Common Faults and Analysis of Hydrogen Compressor

Study on the Application of Combination Technique by HAZOP and Risk Matrix

A New Semi-Quantitative Process Safety Assessment Method and Its Application for Fluorochemical Industry

The Integration of Hazop Expert System and Piping and Instrumentation Diagrams

A dynamic assessment method for risk evolution in chemical processes based on MFM-HAZOP-FDBN

Hydrogen Enriched Ammonia Engines: Assessment of Hydrogen Concentration in the Fuel Feed from the Laminar Flame Speed Viewpoint

HAZOP, FMECA, monitoring algorithm, and Bayesian network integrated approach for an exhaustive risk assessment and real‐time safety analysis: Case study

Numerical Study on Characteristics and Hazard Consequences of the Hydrogen Cloud Explosion in a Hydrogenation Unit

Preliminary hazard identification for qualitative risk assessment on onboard hydrogen storage and supply systems of hydrogen fuel cell vehicles

Intelligent Systems For Hazop Analysis Of Complex Process Plants

Process control design in plants with explosion risk

Safety Analysis of the Hydrolysis Reactor in the Cu-Cl Thermochemical Hydrogen Production Cycle—Part 1: Methodology and Selected Top Events