Safety Analysis of the Hydrolysis Reactor in the Cu-Cl Thermochemical Hydrogen Production Cycle—Part 1: Methodology and Selected Top Events

Leonard Finney,Kamiel Gabriel

DOI: https://doi.org/10.3390/en17051002

IF: 3.2

2024-02-22

Energies

Abstract:In this paper, IEC 61511 was used to evaluate the hazards and risks associated with the continuous operation of the hydrolysis reactor system in the copper-chlorine thermochemical hydrogen production cycle, with a specific focus on the application of automated active safety systems and safety integrated systems. The analysis presented herein was performed using a speculative but representative hydrolysis piping and instrumentation diagram (P&ID) for the hydrolysis reaction, which was based on currently published systems as well as experience with experimental hydrolysis reactors. This analysis was then used to inform the design of a set of automated safety systems that provide the redundant operation of critical devices and can bring the hydrolysis to a safe shutdown state if needed.

energy & fuels

What problem does this paper attempt to address?

The problem this paper attempts to address is the safety analysis of the hydrolysis reactor in the copper-chlorine thermochemical hydrogen production cycle. Specifically, the authors use the IEC 61511 standard to assess the hazards and risks that may exist in the hydrolysis reactor system during continuous operation, particularly the application of automated active safety systems and safety integrated systems. Through this approach, the authors aim to design an automated safety system to ensure the redundant operation of critical equipment and bring the hydrolysis reactor to a safe shutdown state when necessary.

### Main Research Content:
1. **Background Introduction**:
- The copper-chlorine thermochemical hydrogen production cycle (Cu-Cl cycle) is a method of producing hydrogen using thermal energy, characterized by low cost and high efficiency.
- The hydrolysis reaction is the first step in the Cu-Cl cycle, involving the reaction of high-temperature steam with copper chloride (CuCl₂) to produce solid salt containing oxygen (Cu₂OCl₂) and hydrogen chloride (HCl).

2. **Research Objectives**:
- To assess the safety and potential risks of the hydrolysis reactor during continuous operation.
- To design and optimize an automated safety system to ensure timely shutdown of the reactor in case of failure, preventing accidents.

3. **Methods**:
- Use the IEC 61511 standard for hazard and risk assessment.
- Develop a hypothetical piping and instrumentation diagram (P&ID) based on laboratory-scale hydrolysis reactor experience.
- Determine the basic event combinations that could lead to severe accidents through fault tree analysis (FTA).
- Calculate the probability of each minimal cut set (MCS) to determine the total probability of the top event (e.g., boiler explosion).
- Design a safety instrumented system (SIS) to reduce the probability of the top event.

4. **Results**:
- Relying solely on basic safety measures (such as simple pressure relief valves), the annual probability of a boiler explosion is as high as 77.4%.
- By calculating the risk value, it is found that the annual risk cost is approximately 2.1 million CAD.
- To reduce the risk, SIL 3 is chosen as the target safety integrity level, reducing the risk to between 400 and 4000 CAD per year.

### Conclusion:
This paper reveals the potential safety issues of the hydrolysis reactor in the copper-chlorine thermochemical hydrogen production cycle through detailed hazard and risk assessment and fault tree analysis. By designing and optimizing the safety instrumented system, the probability of accidents can be significantly reduced, ensuring the safe operation of the system. This study provides important reference and guidance for future industrial applications.