Abstract:It is extremely difficult to obtain high output power with silicon based processes, which presents one of the greatest challenges for realizing fully integrated transceivers, especially at millimeter-wave frequencies. For this reason, various power combining methods have been proposed to achieve higher power levels.In this paper, a novel power combining method suitable for millimeter-wave applications is presented. The power combining network is synthesized in package utilizing wafer level packaging technology, with an array of power sources of moderate output power capability assumed to be distributed on chip, which means applying further combining in addition to existing on-chip power combining scheme for potentially even higher output power is possible.The power combining network is composed of more basic power combining units, each consisting of one substrate integrated waveguide (SIW) resonator coupling four lambda/4 standing-wave resonators, which can be synthesized using two quarter-wavelength vertical vias with one end open and the other end shorted. For power combining purpose, the open end of each lambda/4 resonator is connected to the differential output of one on-chip power source, while the shorted end is realized using one of the two metal plates of the SIW resonator. The coupling between the SIW resonator and lambda/4 resonators is through slotting on the metal plate to allow magnetic leakage so that oscillation in lambda/4 resonators will excite the SIW resonator to oscillate. As the quality factor of the SIW resonator is much larger than those of lambda/4 resonators, energy is mainly confined in the cavity of the SIW resonator so that power combing is achieved.Example design for 60 GHz application is detailed in the paper with simulation results using commercial CST software showing the effectiveness of the power combining method.

Design of a Microstrip Fourth Frequency-Multiplier at Ka-Band

A Wideband CMOS Frequency Quadrupler with Transformer-Based Tail Feedback Loop.

Design and Auto-Screening of a K-Band GaAs MMIC Multi-Function Power Amplifier

Design and Fabrication of a TR Microsystem in Ka Band with Si-Based 3D Heterogeneous Integration

Design and Simulation of a Ku-band MMIC Power Amplifier

Novel Millimeter-Wave Power Combining Utilizing Wafer Level Packaging Technology

A High Gain Circularly Polarized Microstrip Array Antenna At Millimeter-Wave Band

A 27 - 57 GHz Down-conversion Mixer with Bulk Injection Technique

A Ka-Band High IF Frequency 4th Harmonic Mixer

Design of New Millimeter-wave Power Combiner

A Study on MMIC Millimeter Wave Frequency Multipliers

High-efficiency Ka-band frequency multiplier based on the nonlinear kinetic inductance in a superconducting microstrip

The Research of Ka-band Highly Stable Electronic Tuning Multiplier

A millimeter-wave solid-state power combining circuit based on low-loss corporate waveguide structure

330 GHz and 165GHz two bands output in one stage multiplier based on 4-octave CSMRs LPF

NEW-STYLE MILLIMETER WAVE POWER COMBINING CIRCUIT

325Ghz Balanced Tripler Based on Schottky Diode

A 170‐ to 260‐GHz Full‐Band Frequency Doubler Realized by Impedance Compression Matching Technique

An X-Band Quadruple Frequency Multiplier in 65-Nm CMOS Process

W-band X8 Frequency Multiplier in 65?nm CMOS with 25% Bandwidth and 4.63?dbm Output Power

Design of High Power Tripler Based on On-Chip Schottky Diodes