Abstract:Global navigation satellite system (GNSS) can realize global time synchronization with tens of nanoseconds precision. For more precise time synchronization applications, two-way satellite time and frequency transfer is commonly used despite its high cost and requiring a geostationary satellite. Considering the high cost, people started to use the GNSS signals to realize high accuracy time transfer, named common-view or all-in-view, which can achieve several nanoseconds according to the analyses and verifications of previous studies. However, time transfer cannot realize real-time timing in a large area as a common GNSS one-way timing receiver does. In such a timing system, a highly stable reference and a matched high-precision timing receiver system are necessary. To solve this problem, we have established a one-way timing system based on a ground-based augmentation system. The system estimates real-time high-precision satellite clocks using the ground-based augmentation network as the time reference. Moreover, the time reference is transferred to the terminal through real-time precise point positioning (PPP). Finally, the timing receiver synchronizes its local clock to the reference by real-time clock adjustment, resulting in high-precision timing. We present the details of this system, including the time reference, the PPP algorithm, and the timing receiver technologies. Finally, we give the precision and stability evaluation of the whole system, especially for one pulse per second (1 PPS) outputs of the terminal. The results show that the stability of the 1 PPS output is better than 1 ns in a day.

GPS Chip Development and Timing Performance Analysis

Study on the Application of GPS in the Track Detecting Instrument

The High-Precisiontime System Design of Pico-Satellite Based on GPS Receiver

Design of GPS Receiver Based on OEM Board

Development of high performance GPS synchronizing clock based on MB 90543

A High Accuracy Time Keeping Scheme Based on GPS

Performance Analysis of a Novel Chip Tracking Loop Used for Regenerative Pseudo-Noise Ranging Clock Recovery

Performance Analysis of Chip Tracking Loop Using TDRC Waveform Pseudo-Number Code

Design and Implementation of High-Precision Timing Module for NR Terminals Based on FPGA

Effective Pps Signal Generation with Predictive Synchronous Loop for Gps

Development on GPS Receiver of GJS Series

Foundation and performance evaluation of real-time GNSS high-precision one-way timing system

Development and Evaluation of GPS L2C Software Receiver Baseband Signal Processing Module

Modeling and Improving the Energy Performance of GPS Receivers for Mobile Applications

Research on Broadband RF Chip for High-Precision GNSS Application

A Linear Regression-Based Methodology to Improve the Stability of a Low-Cost GPS Receiver Using the Precision Timing Signals from an Atomic Clock

GPS Receiver with Enhanced User Positioning Time

Simulation and Analysis of GPS Software Receiver

Direct Acquisition Method of GPS P Code and its Parameter Optimization

GPS Receiver Performance Simulation and Analysis under Strong Interference

A Real-Time Software GPS Receiver Based on MAX2769