Abstract:As the construction and modernization of global navigation satellite systems (GNSS), in the near future, the four main navigation systems (GPS, BDS, GLONASS and GALILEO) as well as some regional systems such as QZSS and IRNSS will broadcast many signals in different frequency. Some of the signals may need further adjustment. In interim, the traditional hardware GNSS receivers which have high integration density and low flexibility are not suited for signals monitoring especially for those new signals.In order to meet the requirement of monitoring GNSS signals as well as the joint processing of them, a high-flexibility multi-system full-band real-time GNSS software receiver is developed. In addition to a wideband antenna, a RF front-end and a data acquisition card to fulfill down-conversion and AD conversion, the rest of receiver are implemented in an ordinary PC with a GPU. With efficient acquisition and tracking methods, the proposal receiver can process all of the civil signals from four main GNSS and some of the regional systems in real-time, including GPS L1C/A, L2C, L5, L1C, BDS B1, B2, GLONASS Gl, G2, GALILEO ElOS, E5a, E5b, QZSS L1C/A, L2C, L5, and L1C signals. Based on the software architecture, the receiver can provide PVT results, measurement results, and many intermediate data such as correlator outputs and raw bit stream which are necessary for signals monitoring and performance analysis. Meanwhile, the strong flexibility of this receiver makes it easy to expansion and update in the future. The GLONASS modernized signals as well as BDS Phase III signals can be quickly added to current receiver after the release of their interface control document (ICD).By using the proposed software receiver, this paper presents the real-time tracking states of all civil signals, the positioning results of each navigation signal, and the monitoring results of viable GNSS satellites. Finally, since the receiver can handle all the civil GNSS signals in real-time and has a flexible structure, it can be used as a dedicated development platform for various types of navigation research.

GPS Receiver with Enhanced User Positioning Time

The High-Precisiontime System Design of Pico-Satellite Based on GPS Receiver

A High Accuracy Time Keeping Scheme Based on GPS

A Fast Positioning Method Based On High-Precision Clock For Gnss Receivers

Effective Pps Signal Generation with Predictive Synchronous Loop for Gps

Low-Cost GNSS Simulators with Wireless Clock Synchronization for Indoor Positioning

Design of GPS Receiver Based on OEM Board

Snapshot positioning for unaided GPS software receivers

A Framework for GPS/INS Based Portable Positioning System

Analysis of a fast hot-start algorithm in GPS receiver

A Real-Time Software GPS Receiver Based on MAX2769

Real-time Precise Point Positioning with a Xiaomi MI 8 Android Smartphone

A Fine-Tuned Positioning Algorithm for Space-Borne GNSS Timing Receivers

A new coarse-time GPS positioning algorithm using combined Doppler and code-phase measurements

Precise point positioning for ground-based navigation systems without accurate time synchronization

Implementation of a High-Sensitivity Global Navigation Satellite System Receiver on a System-on-Chip Field-Programmable Gate Array Platform

Starx A Gpu Based Multi-System Full-Band Real-Time Gnss Software Receiver

A Linear Regression-Based Methodology to Improve the Stability of a Low-Cost GPS Receiver Using the Precision Timing Signals from an Atomic Clock

Development of a Real-Time Software-Defined Radio GPS Receiver Exploiting a LabVIEW-based Instrumentation Environment

NaviSoC: High-Accuracy Low-Power GNSS SoC with an Integrated Application Processor

Energy Efficient GPS Acquisition with Sparse-Gps