Abstract:Doppler shift is an essential measurement within a GNSS receiver, which reflects the relative velocity between the transmitter and the receiver. Therefore, the Doppler measurement provides an alternative approach to the Position, Velocity, Timing (PVT) solution, which is commonly termed Doppler positioning. In this way, Doppler positioning can serve as a complement to conventional pseudorange positioning. Besides, Doppler positioning is also an essential component of LEO satellite navigation and anti-spoofing schemes. Therefore, researches for precise, real-time, and wide applicability Doppler positioning algorithms have been gradually attached importance. However, the practicality of existing methods is limited, due to the shortcomings in terms of accuracy performance and real-time use. To this end, a precise real-time Doppler positioning technique is investigated in this paper, using a stand-alone GNSS receiver. Inspired by the superiority of real-time use, modifying the conventional Least Squares (LS) based approach is the basic idea of our work to improve the Doppler positioning performance. Both the position and velocity results can be derived from the LS-based Doppler positioning technique, meanwhile, the velocity solution has much higher accuracy than the position, which will be demonstrated in this paper. Thereby, the improvement on positioning accuracy is achieved by exploiting the velocity result to smooth the original position result, which is directly computed from the LS-based approach. In particular, a Position-Domain (PD) filter is implemented for the fusion of position and velocity. Compared with a Kalman Filter (KF), the PD filter is capable of freeing the user from the inconvenience of selecting an appropriate model and initial value, as the choice of which will dramatically influence the performance of a KF. A basic demonstration of the validity and enhancement of our work is conducted with two field tests. Compared with the LS-based approach, the Root-Mean-Square Error (RMSE) is reduced from 5km to 28.96m in the dynamic scenario, and from 4km to 21.82m in the static scenario.

Effective Pps Signal Generation with Predictive Synchronous Loop for Gps

A High Accuracy Time Keeping Scheme Based on GPS

The High-Precisiontime System Design of Pico-Satellite Based on GPS Receiver

Precision Real-Time Orbit Determination Algorithm and Hardware-in-the-Loop Simulation for ZDPS-2 Satellite

Study of Fast and Reliable Time Transfer Methods Using Low Earth Orbit Enhancement

Analysis of GPS satellite clock prediction performance with different update intervals and application to real-time PPP

Foundation and performance evaluation of real-time GNSS high-precision one-way timing system

Accuracy Analysis of BeiDou-3/GPS Real-Time Precise Common View Time Transfer Based on Carrier-Phase

The effect of satellite code bias on GPS PPP time transfer

Performance Analysis of Multi-GNSS Real-Time PPP-AR Positioning Considering SSR Delay

Pseudolite system-augmented GNSS real-time kinematic PPP

Impacts of satellite clock errors on GPS/BDS/Galileo real-time PPP time transfer

Continuous time and frequency transfer using robust GPS PPP integer ambiguity resolution method

Quality evaluation of the pulse per second (PPS) signals from commercial GNSS receivers

Study of High-Precision Time Transfer Method Enhanced by PPP-AR/PPP-RTK

Improving PPP Timing and Time Transfer Based on Signal Distortion Biases Calibration

Dual Update-Rate Carrier Tracking Technique for New Generation Global Navigation Satellite System Signals in Dynamic Environments

Precise Real-Time Doppler Positioning Using a Stand-Alone GNSS Receiver

Precise Measurement of the Channel Delay for GNSS Signal Simulator Based on the Software Receiver

Initial and comprehensive analysis of PPP time transfer based on Galileo high accuracy service

Joint Code Acquisition and Doppler Frequency Shift Estimation for Gps Signals