Abstract:The drying process significantly influences the dispersion of metals, physical properties, and performance of monolithic catalysts. In this research, a cordierite-based monolithic catalyst with Co/& gamma;-Al2O3 was prepared using the slurry and impregnation method. The impact of ambient humidity on metal dispersion, mass transfer performance, and catalytic performance was investigated. The findings revealed distinct crystallization-deliquescence curves in the saturated impregnated monolithic catalysts, with alternating crystallization and deliquescence phenomena occurring as the ambient humidity changed. When the coating adhesion was high, the simultaneous occurrence of internal crystallization and surface dissolution resulted in concentrated internal stress, which facilitated the micro-stripping of the coating, leading to the formation of a cobweb-like microstructure. This process affected the distribution of pore sizes and enhanced mass transfer performance. The Co-based catalysts prepared in this study demonstrated a high selectivity for C5+ products (73.93%) when employed in the Fischer-Tropsch synthesis reaction. This research offers an optimization strategy for catalyst preparation, aiming to develop monolithic catalysts with low melting points, high crystallinity, and supersaturated supported transition metals.

EFFECTS OF HEAT TREATMENT ON STRUCTURE AND PROPERTIES OF ULTRAFINE K-Co-Mo CATALYSTS

Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Sol–gel Preparation of K–Co–Mo Catalyst and Its Application in Mixed Alcohol Synthesis from CO Hydrogenation

Mixed Alcohol Synthesis from Syngas on K–Co–Mo/C Catalyst Prepared by a Sol–Gel Method

Catalytic Properties and Structure of the K-Co-Mo Catalysts Prepared by Sol-Gel Method for Mixed Alcohol Synthesis — Effect of K Content

Effect of KCoMoS2 Catalyst Structures on the Catalytic Performance of Higher Alcohols Synthesis via CO Hydrogenation

Effects of Cobalt Promoter and Reduction Temperature on the Surface Species and Syngas Adsorption of K–Co–Mo/C Catalyst for Mixed Alcohols Synthesis

Effect of cobalt promoter on Co–Mo–K/C catalysts used for mixed alcohol synthesis

EFFECT OF PREPARATION CONDITIONS ON THE PROPERTIES OF CoMoP HYDROTREATING CATALYST

Influence of Carbonization Conditions on Structural and Surface Properties of K-Doped Mo2C Catalysts for the Synthesis of Methyl Mercaptan from CO/H2/H2S

Preparation of Co-Mo/γ-Al2O3 catalyst and the catalytic hydrogenation effects on coal-related model compounds

Effect of Co Additive on the Formation of Carbon Deposit on Mo/Mcm-22 Catalyst for Methane Dehydro-Aromatization

Effects of temperature and time on the facile low-temperature pre-sulfurization of tube-like unsupported Co-Mo catalysts for hydrodesulfurization

Effects of MgO on Co-Mo/Al 2O 3-MgO catalyst performances in hydrodesulfurization

Effect of modification of the alumina acidity on the properties of supported Mo and CoMo sulfide catalysts

Influences of preparation methods of ZrO2 support and treatment conditions of Cu/ZrO2 catalysts on synthesis of methanol via CO hydrogenation

Effect of Lanthanum Promotion on the Unsupported Mo–Co–K Sulfide Catalysts for Synthesis of Mixed Alcohols from Syngas

Tailoring the Structure of Co-Mo/mesoporous Γ-Al2o3 Catalysts by Adding Multi-Hydroxyl Compound: A 3000 Kt/a Industrial-Scale Diesel Ultra-Deep Hydrodesulfurization Study

Mass Transfer Enhancement and Drying Mechanism of High Adhesion Saturated Impregnated Co-Al2O3 Monolithic Catalyst

Effect of Modification of SBA-15 by Carbon Films on Textural and Catalytic Properties of Supported Cobalt Catalysts