Abstract:Mesoporous molecular sieves (MCM-41 and SBA-15) with different pore diameters have been studied as supports of high loading of Co catalysts, and the performances in FT synthesis have been examined with a fixed bed stainless steel reactor at 2.0MPa for the purpose of efficient production of C10–C20 fraction as the main component of diesel fuel. The method of exchanging template ions in uncalcined MCM-41 with Co2+ ions is effective for holding 10–20% Co within the mesopores while keeping the structure regularity of MCM-41 to some extent, compared with the conventional impregnation method using calcined MCM-41. At 523K, CO conversion and selectivity to C10–C20 hydrocarbons are both higher at larger loading of 20% Co for the exchanged catalysts with pore diameters of 2.7–2.9nm. When four kinds of 20% Co/SBA-15 with the diameters of 3.5–13nm, prepared by the impregnation method using an ethanol solution of Co acetate, are used in FT synthesis at 523K, the catalyst with the diameter of 8.3nm shows the largest CO conversion, which is higher than those over MCM-41 supported Co catalysts. At a lower temperature of 503K, however, the acetate-derived Co is almost inactive. In contrast, the use of Co nitrate alone or an equimolar mixture of the acetate and nitrate as Co precursor drastically enhances the reaction rate and consequently provides high space–time yield (260–270gC/kgcath) of C10–C20 hydrocarbons. The X-ray diffraction and temperature-programmed reduction measurements show that the dependency of the catalytic performance of 20% Co/SBA-15 on its precursor originates probably from the differences in not only the reducibility of the calcined catalyst but also the dispersion of metallic Co. Catalyst characterization after FT synthesis strongly suggests the high stability of the most effective Co/SBA-15 in the dispersion and reducibility of the oxide species and in the mesoporous structure.

Effect of Modification of SBA-15 by Carbon Films on Textural and Catalytic Properties of Supported Cobalt Catalysts

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Synthesis of SBA-15 with different pore sizes and the utilization as supports of high loading of cobalt catalysts

Amino-Ended Hyperbranched Polyamide Modified SBA-15 As Support for Highly Efficient Cobalt Fischer-Tropsch Synthesis Catalyst

Co-Based Catalysts Supported on Silica and Carbon Materials: Effect of Support Property on Cobalt Species and Fischer–Tropsch Synthesis Performance

Effect of Silylation of SBA-15 on Its Supported Cobalt Catalysts for Fischer-Tropsch Synthesis

The modification of titanium in mesoporous silica for Co-based Fischer-Tropsch catalysts

Dispersion of Nano Nickel Particles over SBA-15 Modified by Carbon Films on Pore Walls

SBA-16 with Different Pore Size Supported Cobal Catalyst for Fischer-Tropsch Synthesis

Enhancing the Stability of a Cobalt-Based Fischer–Tropsch Synthesis Catalyst Using G-C3n4-coated SBA-15 As Support

The Role of Carbon Pre-Coating for the Synthesis of Highly Efficient Cobalt Catalysts for Fischer–Tropsch Synthesis

Enhancement of CO2 Methanation over La-Modified Ni/SBA-15 Catalysts Prepared by Different Doping Methods

Synergetic Effect Of Ni And Co In Ni-Co/Sba-15-Cd Catalysts And Their Catalytic Performance In Carbon Dioxide Reforming Of Methane

Synthesis and Characterizations of TiN–SBA-15 Mesoporous Materials for CO2 Dry Reforming Enhancement

Uniformity Dispersive, Anti-Coking Core@double-Shell-structured Co@SiO2@C: Effect of Graphitic Carbon Modified Interior Pore-Walls on C5+ Selectivity in Fischer-Tropsch Synthesis

Synthesis and Characterization of Co-SBA-15 Via Rapid Ultrasonic Technique and Their Catalytic Properties

Chromium-based Catalysts for Ethane Dehydrogenation: Effect of SBA-15 Support

Novel utilization of mesoporous molecular sieves as supports of cobalt catalysts in Fischer–Tropsch synthesis

SBA‐16‐Supported Cobalt Catalyst with High Activity and Stability for Fischer–Tropsch Synthesis

Effects of Α- and Γ-Cyclodextrin-modified Impregnation Method on Physicochemical Properties of Ni/SBA-15 and Its Catalytic Performance in CO2 Reforming of Methane

Effects of Β-Cyclodextrin Modification on Properties of Ni/SBA-15 and Its Catalytic Performance in Carbon Dioxide Reforming of Methane