Abstract:The augmentation of lubricant oil properties is key to protecting engines, bearings, and machine parts from damage due to friction and wear and minimizing energy lost in countering friction. The tribological and rheological properties of the lubricants are of utmost importance to prevent wear under unembellished conditions. The marginal addition of particulate and filamentous nanofillers enhances these properties, making the lubricant oil stable under severe operating conditions. This research explores the improvement in SAE 5w-30 base oil performance after the addition of multiwalled carbon nanotubes (MWCNTs) in six marginal compositions, namely, Base, 0.02, 0.04, 0.06, 0.08, and 0.10 weight percentage. The effect of the addition of MWCNTs on flash and pour points, thermal conductivity, kinematic viscosity, friction coefficients, and wear are investigated and reported. X-ray diffraction and transmission electron microscopy are used to characterize the MWCNTs. The purity, crystallinity, size, shape, and orientation of the MWCNTs are confirmed by XRD and TEM characterization. Pour points and flash points increase by adding MWCNTs but inconsistency is observed after the 0.06 wt.% composition. The thermal conductivity and kinematic viscosity increase significantly and consistently. The friction coefficient and wear scar diameter reduce to 0.06 wt.% MWCNTs and then the trend is reversed due to agglomeration and inhomogeneity. A composition of 0.06 wt.% is identified as the optimum considering all the investigated properties. This composition ensures the stability of the tribo-film and hydrodynamic lubrication.

Remarkable Lubricity of CNTs Microspheres As Additives in Oil Lubricant for Ceramic Components

Tribological Properties of CNT microspheres as a Lubricant Additive

Investigation on Tribological Properties of Lubricating Oil with Carbon Nanotubes Additive

The Tribological Behaviors and Mechanism of Carbon Nanotubes as Oil Additive

Enhancing the tribological properties of hydraulic oil-based nanolubricants using MWCNT-SiO2 hybrid nanoparticles

Optimization of the Rheological Properties and Tribological Performance of SAE 5w-30 Base Oil with Added MWCNTs

Tribological Performance of Nanocomposite Carbon Lubricant Additive

Fabrication of Novel CeO2/GO/CNTs Ternary Nanocomposites with Enhanced Tribological Performance

Tribological properties of carbon nanotube-doped carbon/carbon composites

Cellulose-armored “CNTs-soft metal” hybrid nanomaterials to improving the friction-reduction and anti-wear performance of bio-lubricants

Tribo-induced Evolution of Nodular Supporting Structures Providing High-Performance Solid Lubricants in Carbon Nanotube Coated Films

Tribological Behavior of Carbon-Nanotube-Filled PTFE Composites

Synergistic low friction effect and mechanism of inorganic fullerene-like tungsten disulfide and talcum at the interface of steel tribo-pairs under severe conditions

Tribological Behaviors of Surfactant-Functionalized Carbon Nanotubes As Lubricant Additive in Water

High Temperature Tribological Performance of Steel/Copper Friction Pairs Lubricated with a Modified C-WS2-(Fe3O4 + TiN) Nanoadditives in Non-Copper Coated Solid Wires

Lubrication mechanism analysis of nickel-carbon-based tribological layer on sliding interfaces in automotive engines

The Synergistic Lubrication Effects of h-BN and g-C3N4 Nanoparticles as Oil-Based Additives for Steel/Steel Contact

Micro/Nano Carbon Spheres As Liquid Lubricant Additive: Achievements and Prospects

Effects of Lubricants on Friction and Wear of Ti(Cn)/1045 Steel Sliding Pairs

Tribological Application of Carbon Nanotubes in a Metal-Based Composite Coating and Composites

Tribological performance and lubrication mechanism of carbon nitride nanosheets as novel and high-efficiency additives for water lubrication