Abstract:This study presents a nitrogen-doped microporous carbon nanospheres (N@MCNs) prepared by a facile polymerization–carbonization process using low-cost styrene. The N element in situ introduces polystyrene (PS) nanospheres via emulsion polymerization of styrene with cyanuric chloride as crosslinking agent, and then carbonization obtains N@MCNs. The as-prepared carbon nanospheres possess the complete spherical structure and adjustable nitrogen amount by controlling the relative proportion of tetrachloromethane and cyanuric chloride. The friction performance of N@MCNs as lubricating oil additives was surveyed utilizing the friction experiment of ball-disc structure. The results showed that N@MCNs exhibit superb reduction performance of friction and wear. When the addition of N@MCNs was 0.06 wt%, the friction coefficient of PAO-10 decreased from 0.188 to 0.105, and the wear volume reduced by 94.4%. The width and depth of wear marks of N@MCNs decreased by 49.2% and 94.5%, respectively. The carrying capacity of load was rocketed from 100 to 400 N concurrently. Through the analysis of the lubrication mechanism, the result manifested that the prepared N@MCNs enter clearance of the friction pair, transform the sliding friction into the mixed friction of sliding and rolling, and repair the contact surface through the repair effect. Furthermore, the tribochemical reaction between nanoparticles and friction pairs forms a protective film containing nitride and metal oxides, which can avert direct contact with the matrix and improve the tribological properties. This experiment showed that nitrogen-doped polystyrene-based carbon nanospheres prepared by in-situ doping are the promising materials for wear resistance and reducing friction. This preparing method can be ulteriorly expanded to multi-element co-permeable materials. Nitrogen and boron co-doped carbon nanospheres (B,N@MCNs) were prepared by mixed carbonization of N-enriched PS and boric acid, and exhibited high load carrying capacity and good tribological properties.

Micro/Nano Carbon Spheres As Liquid Lubricant Additive: Achievements and Prospects

Tribological Properties of CNT microspheres as a Lubricant Additive

Enhancing the tribological properties of hydraulic oil-based nanolubricants using MWCNT-SiO2 hybrid nanoparticles

Research progresses of nanomaterials as lubricant additives

Superlubricity of Carbon Nanostructures

Sulfur-Containing Carbon Nanospheres as Lubricant Additives for Antiwear and Friction Reduction

Superlubricity Achieved with Two-Dimensional Nano-Additives to Liquid Lubricants

Thin Films of Fullerene-Like MoS2 Nanoparticles with Ultra-Low Friction and Wear

Carbon nanomaterials in tribology

Nanolubricant Additives: A Review

In-situ formation of nitrogen doped microporous carbon nanospheres derived from polystyrene as lubricant additives for anti-wear and friction reduction

Effect of 2D Cu-MOFs modified carbon spheres nanoparticles as an environmentally friendly lubricating additive on tribological properties

Applications of carbon quantum dots in lubricant additives: a review

Nanomaterials for lubricating oil application: A review

The Application of Nano-MoS2 Quantum Dots as Liquid Lubricant Additive for Tribological Behavior Improvement

Development of Doped Carbon Quantum Dot-Based Nanomaterials for Lubricant Additive Applications

Enhancing Lubrication Efficiency and Wear Resistance in Mechanical Systems through the Application of Nanofluids: A Comprehensive Review

Macroscale Superlubricity: Macroscale Superlubricity Enabled by Graphene‐Coated Surfaces (Adv. Sci. 4/2020)

Nanomaterials in Superlubricity

Review of two-dimensional nanomaterials in tribology: Recent developments, challenges and prospects

Research Progress in Application of 2D Materials in Liquid-Phase Lubrication System