Abstract:A series of experiments has been conducted to investigate the tribological properties of a TiN film sliding against GCr15 steel balls in ambient air, low vacuum and high vacuum environments. Various friction loads and sliding velocities were also applied. The TiN film displays a steady-state friction stage after the running-in stage in all the above environments, while the durations of running-in stages are different. The steady-state friction coefficients of the TiN film were around 0.56 in ambient air and 0.3 in the high vacuum environment (1 × 10−5 mbar). In the low vacuum (1 × 10−2 mbar) environment, a low friction coefficient (around 0.19) was attained for all the friction tests on TiN film, irrespective of the applied load and sliding velocity. In the meantime, it was noticed that the applied loads and the sliding velocities would change the duration of the running-in stage before reaching the low friction coefficient. It is revealed by the analysis of wear tracks that the metal oxides induced by the tribo-chemical effect at the friction interface play an important role in affecting the tribological behaviors of the TiN films in different environments. The Raman results show that the main component of the metal oxides is hematite (α-Fe2O3), and the amount of iron oxide is related to the friction environment. The composition and quantity of iron oxides produced by the interfacial tribo-chemical effect affect the tribological behavior. The results also show that the mechanical wear process at the friction interface displays a polishing effect, which would reduce the surface roughness. The mechanical wear performance varies under different loads and velocities. The tribological tests results indicate that the interfacial tribo-chemical effect and mechanical wear process should be considered together rather than individually to interpret the tribological behaviors of TiN films in different environments.

Effects of Lubricants on Friction and Wear of Ti(Cn)/1045 Steel Sliding Pairs

A Comparative Investigation of the Tribological Behavior and Wear Mechanism of Bronze-graphite Composite under Dry- and Water-lubricated Sliding Against Steel

The effect of tribofilm formation on the tribological characteristics of ceramic-cast iron sliding pairs

Friction and Wear Performance of Titanium Alloys against Tungsten Carbide under Dry Sliding and Water Lubrication

Influence of Interfacial Tribo-Chemical and Mechanical Effect on Tribological Behaviors of TiN Film in Different Environments

Study On The Tribological Properties Of Titanium Alloys Sliding Against Wc-Co During The Dry Friction

High Temperature Tribological Performance of Steel/Copper Friction Pairs Lubricated with a Modified C-WS2-(Fe3O4 + TiN) Nanoadditives in Non-Copper Coated Solid Wires

Comparison of the Tribological Behavior of Steel–steel and Si3N4–steel Contacts in Lubricants with ZDDP or Ionic Liquid

Tribological Behavior of Textured Cemented Carbide Filled with Solid Lubricants in Dry Sliding with Titanium Alloys

Tribological performance of GLC, WC/GLC and TiN films on the carburized M50NiL steel

Effect of Nanoparticles on the Tribo-Layers and the Tribology of a Steel-on-steel Couple

Effect of Sliding Speed and Applied Load on Dry Sliding Tribological Performance of TiAl Matrix Self-lubricating Composites

Mechanical and Unlubricated Tribological Properties of Titanium-Containing Diamond-Like Carbon Coatings

Wear mechanisms of pairs of Si3N4-based and Ti(CN)-based ceramic with 1Cr18Ni9Ti stainless steel under dry-friction condition

Wear mechanisms of Ti(C, N) ceramic in sliding contact with stainless steel

Effect of Natural Attapulgite Powders As Lubrication Additive on the Friction and Wear Performance of A Steel Tribo-Pair

Effects Of Polymer Composited Lubricant Coating On Tribological Properties Of Low-Carbon Steel Surface

Effect of Triangular Texture on the Tribological Performance of Die Steel with Tin Coatings under Lubricated Sliding Condition

The Tribological Behaviour of Fe–28Al–5Cr/TiC under Liquid Paraffine Lubrication

Tribological Properties of Si3n4 Sliding Against Bearing Steel under Different Conditions