Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Effect of fines addition on heat transfer performance in gas-solid fluidized bed: An integrated experimental, simulation, and theoretical study

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

CFD Simulation of an Agitated Gas-Fluidized Bed: Effects of Particle–particle Restitution Coefficient on the Hydrodynamics

Experimental Investigation of Electrostatic Effect on Particle Motions in Gas-Solid Fluidized Beds

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Heat Transfer of Batch Simulating Continuous Fluidized Bed with Wet Particles

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Effects of Interparticle Forces on Fluidization Characteristics in Liquid-Containing and High-Temperature Fluidized Beds

CFD-DEM Study of the Effects of Solid Properties and Aeration Conditions on Heat Transfer in Fluidized Bed

Computational study of heat transfer in a bubbling fluidized bed with a horizontal tube

Effect of particle collision behavior on heat transfer performance in a down-flow circulating fluidized bed evaporator

Computational study of heat transfer in bubbling fluidized beds with geldart a powder

Effects of tube configurations on the heat transfer and hydrodynamic behavior in a gas-solid fluidized bed

Electrostatic behavior with fines of different sizes added into gas-solid fluidized bed

Effects of Gas Composition and Operating Pressure on the Heat Transfer in an Oxy-Fuel Fluidized Bed: a CFD–DEM Study

Experimental and Numerical Investigation of Enhancement of Heat and Mass Transfer in Adsorbent Beds

Experimental and numerical investigations on the hydrodynamics of gas-solid fluidized bed with an inclined agitator

Experimental investigation on the heat transfer characteristics between gas and solids in a centrifugal fluidized bed

CFD Simulation of Electrostatic Effect on Gas Interchange, Vortex and Heat Transfer in the Gas-Solid Fluidized Bed

Bed-to-tube Heat Transfer Characteristics with an Immersed Horizontal Tube in the Pressurized Fluidized Bed at High Temperature

Numerical Investigation of the Effect of the Location of an Immersed Tube in a Fluidized Bed on Heat Transfer of Surface-to-bed