Abstract:Advanced lightweight high-strength steels are often compositionally and microstructurally complex. While this complex feature enables the activation of multiple strengthening and strain-hardening mechanisms, it also leads to a complicated damage behavior, especially in the presence of hydrogen (H). The mechanisms of hydrogen embrittlement (HE) in these steels need to be properly understood for their successful application. Here we focus on a high-Mn (∼20 wt.%), high-Al (∼9 wt.%) lightweight steel with an austenite (∼74 vol.%) and ferrite (∼26 vol.%) two-phase microstructure and unravel the interplay of H-related decohesion and localized plasticity and their effects on failure. We find that HE in this alloy is driven by both, H-induced intergranular cracking along austenite-ferrite phase boundaries and H-induced transgranular cracking inside the ferrite. The former phenomenon is attributed to the mechanism of H-enhanced decohesion. For the latter damage behavior, systematic scanning electron microscopy-based characterization reveals that only parts of the transgranular cracks inside ferrite are straight (∼52% proportion) and along the cleavage plane. Other portions of these transgranular cracks show a distinct deviation from the {100} planes at certain stages of crack propagation, which is associated with a mechanism transition from the H-enhanced transgranular decohesion of the ferrite by cleavage to the H-associated localized plasticity occurring near the propagating crack tip. These mechanisms are further discussed based on a detailed comparison to the damage behavior at cryogenic temperatures and on the nanoindentation results performed with in-situ H-charging. The findings provide new insights into the understanding of the interplay between different HE mechanisms operating in high-strength alloys and their synergistic effects on damage evolution.

Hydrogen Trapping and Embrittlement Susceptibility in Al-Cu-Li Alloys

The role of lithium in hydrogen trapping and embrittlement of Al-Cu-Li alloys: Experimental study and DFT calculations

Hydrogen trapping and embrittlement in high-strength Al alloys

Hydrogen trapping and embrittlement in high-strength Al-alloys

Immunity of Al0.25CoCrFeNi high-entropy alloy to hydrogen embrittlement

Suppressed Hydrogen Embrittlement of High-Strength Al Alloys by Mn-rich Intermetallic Compound Particles

Effect of heat treatment on hydrogen embrittlement susceptibility of Al 0.25 CoCrFeNi high entropy alloy

Role of solute atoms and vacancy in hydrogen embrittlement mechanism of aluminum: A first-principles study

Optimizing the hydrogen embrittlement resistance by Cu addition in a low carbon high strength steel

Defeating Hydrogen-Induced Grain-Boundary Embrittlement Via Triggering Unusual Interfacial Segregation in FeCrCoNi-type High-Entropy Alloys

Evaluation of Hydrogen Embrittlement Characteristics of Fe3Al Intermetallic Compounds

Enhancement of hydrogen embrittlement resistance in a Fe-18Mn-0.6C twinning induced plasticity steel by copper alloying

Predicting hydrogen microporosity in long solidification range ternary Al-Cu-Li alloys by coupling CALPHAD and cellular automata model

Quantitative contribution of T1 phase to the strength of Al-Cu-Li alloys

Hydrogen embrittlement of additively manufactured AlCoCrFeNi2.1 eutectic high-entropy alloy

Hydrogen embrittlement of a precipitation-strengthened high-entropy alloy

Hydrogen microporosity evolution and dendrite growth during long solidification of Al-Cu-Li alloys: Modeling and experiment

Precipitation of T1 Phase in 2198 Al–Li Alloy Studied by Atomic-Resolution HAADF-STEM

Heterogeneous nucleation of T1 precipitates in solid solution of Al-Cu-Li alloys from Ag-rich structures: An ab initio study

Hydrogen-associated decohesion and localized plasticity in a high-Mn and high-Al two-phase lightweight steel

Enhanced matrix precipitation of T1 (Al2CuLi) phase in AA2055 Al–Li alloy during stress aging process