Abstract:Corrosion defects in steel pipes can lead to pipeline failure, and such failures can have severe impacts; thus, developing appropriate corrosion mitigation schemes to prevent them can be beneficial. To this end, the influences of variables such as the depth, length, and group spacing of corrosion defects on the failure of X80 steel pipes containing group corrosion defects were analysed in this study. Abaqus, a simulation software, was used for non-linear finite element analyses, and 52 groups corresponding to corrosions under different geometric factors were prepared. Furthermore, a pipeline failure pressure prediction model was established using 138 sets of simulations to determine the maximum von Mises stresses of pipelines subjected to internal pressures under different working conditions. Actual blast test data and error comparisons with various existing evaluation standards were conducted to verify the accuracy of the proposed model. The results revealed that an increase in the internal pressure and the changes in the depth, length, and group spacing of group corrosion defects impact the maximum von Mises stress in the pipe. Among the group corrosion defects considered, the depth of the deepest defect was found to be the most critical factor in determining the form of damage and the failure pressure of pipes containing corrosion defects. The length of corrosion defects and the axial spacing between groups of defects were found to be the secondary factors that affect the failure pressure. In an actual pipeline, group corrosion defects are expected to cause a reduction in the wall thickness and, thus, pose a threat to safety, an issue that warrants substantial attention. The results of this work can serve as a reference for assessing the failure of X80 steel pipelines containing group corrosion defects.

Theoretical Evaluation Methods for Remaining Strength of Seawater Pipelines with Corrosion Defects

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Evaluating Fitness-for-Service of Corroded Metal Pipelines: Structural Reliability Bases

Study on the effect of corrosion defects on VIV behavior of marine pipe using a new defective pipe element

Applicability evaluation technology for steel small diameter pipes containing external surface corrosion defects

Reliability-Based Framework for Determination of Fitness for Service of Corroding Metal Pipes

THE EVALUATION METHOD FOR DEFECTS OF SUBMARINE PIPELINE AT DESIGN PERIOD

Analysis of Influence Parameters for the Remaining Strength Assessment of Corroded Pipelines

Integrity Assessment of the Pipelines Containing an Isolated Corrosion Pit

Theoretical analysis of the collapse behaviour of subsea pipelines with corrosion defects under external pressure

Mechanical model and probability analysis of buried pipelines failure under uniform corrosion

Effect of the Y/T on the Burst Pressure for Corroded Pipelines with High Strength

Failure pressure analysis of corroded moderate-to-high strength pipelines

Reliability analysis of gas pipeline with corrosion defect based on finite element method

Time-dependent Reliability Assessment of Steel Pipelines Subjected to Localized Corrosion

Finite element modeling of corrosion defect growth and failure pressure prediction of pipelines

A review on defect assessment of pipelines: Principles, numerical solutions, and applications

Finite element analysis of the failure of high-strength steel pipelines containing group corrosion defects

Study on Evaluation Method of Failure Pressure for Pipeline with Axially Adjacent Defects

Analytical prediction of failure pressure for pipeline with long corrosion defect

On Collapse Failure Analysis Of Subsea Corroded Sandwich Pipelines Under External Pressure