Abstract:Elevated temperature pressure swing adsorption is a newly developed gas purification technology, wherein the product gas recovery rate can be significantly improved by adding a steam rinse and purge. Furthermore, high temperature industrial syngas can be directly purified at elevated temperatures, so the temperature variation during purification process is not as large as that in Selexol, Rectisol or some other methods, which benefits to the simplification of heat management and improvement of energy efficiency. At working temperatures of approximately 200 °C, activated carbon is considered to be a promising adsorbent. Nevertheless, activated carbon also adsorbs large amounts of steam during rinse and purge, which affects its adsorption capacity. Herein, hydrophobic activated carbon was synthesized by impregnation and characterized, achieving a contact angle with a water droplet of up to 134°. When exposed to wet air, the weight increase of the hydrophobic adsorbent was 0.3%, whereas it was approximately 12% for the commercial activated carbon, which can be mainly attributed to vapor adsorption. The CO2 adsorption capacity was tested under humid conditions at 200 °C on a fixed bed. The effect of steam on the hydrophobic adsorbent was much smaller than that on the commercial adsorbent. The working capacity decreased from 0.091 to 0.009 mmol/g when the commercial activated carbon was operated under steam at 1 atm, whereas the hydrophobic material exhibited a stable and desired working capacity at the same condition, which was around 0.05 mmol/g. Steam rinse and purge were demonstrated to be feasible for the hydrophobic adsorbent and the introducing of steam rinse could not only compensate for the deterioration of adsorption capacity resulting from impregnation, but further improve the purification efficiency.

Steam adsorption equilibrium data at 110°C on an activated carbon, Lewatit VP OC 1065, and CALF-20 using a microscale dynamic column breakthrough apparatus

Steam Adsorption Equilibrium Data at 110 °C on Activated Carbon, Lewatit VP OC 1065, and CALF-20 Using a Microscale Dynamic Column Breakthrough Apparatus

Measurement of Physicochemical Properties and CO2, N2, Ar, O2, and H2O Unary Adsorption Isotherms of Purolite A110 and Lewatit VP OC 1065 for Application in Direct Air Capture

Competitive CO 2 /H 2 O Adsorption on CALF-20

Binary CO2/H2O adsorption on CO2 capture metal-organic frameworks CALF-20, Al-Fumarate and CAU-10H using microscale dynamic column breakthrough

Evaluation of CO2/H2O Co-Adsorption Models for the Anion Exchange Resin Lewatit VPOC 1065 under Direct Air Capture Conditions Using a Novel Lab Setup

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Experimental Study of Breakthrough Adsorption on Activated Carbon for CO2 Capture

Heat and mass transfer during H2O/CO2 adsorption separation using activated alumina

Thermodynamic Study on Two Adsorption Working Cycles for Direct Air Capture

Heat and Mass Transfer of Water During Activated Carbon Adsorption

Quantification of temperature-dependent CO2 adsorption kinetics in Lewatit VP OC 1065, Purolite A110, and TIFSIX-3-Ni for direct air capture

Hydrophobic activated carbon for elevated-temperature pressure swing adsorption

Experimental Study on the Kinetics of CO2 and H2O Adsorption on Honeycomb Carbon Monoliths under Cement Flue Gas Conditions

Improvement of Temperature Profiles Using Variable Heat of Adsorption in Modeling H 2 /CO 2 Breakthrough Experiments

Evaluating isotherm models for the prediction of flue gas adsorption equilibrium and dynamics

Simulation of Capturing Carbon Dioxide from Flue Gas by Activated Carbon

Water effect on adsorption carbon capture in metal-organic framework: A molecular simulation

Adsorption of Pure and Binary Co2, Ch4, and N-2 Gas Components on Activated Carbon Beads

Real adsorbed solution theory model for the adsorption of CO2 from humid gas on CALF-20

Experimental Demonstration of Humid Post-Combustion CO2 Capture by Vacuum Swing Adsorption Using CALF-20