Real adsorbed solution theory model for the adsorption of CO2 from humid gas on CALF-20

Bennett Marshall,Harnoor Kaur

DOI: https://doi.org/10.26434/chemrxiv-2023-2cp2c

2023-11-17

Abstract:CALF-20 is a metal organic framework which acts as a physical adsorbent for CO2. A potential benefit of CALF-20 over more traditional zeolite physical adsorbents is that CALF-20 exhibits a strong Type I adsorption behavior for CO2, while water exhibits S shaped Type V adsorption. As a result, CALF-20 maintains most of its CO2 capacity for up to 50% relative humidity modelling and predicting the multi-component adsorption of water and CO2 on CALF-20 is a prerequisite for accurate process modeling. In this work a real adsorbed solution theory (RAST) model is developed to predict the non-ideal multi-component adsorption in H2O – CO2 – N2 gas mixtures. We demonstrate that RAST can accurately represent the non-ideal adsorption. The RAST model is then applied to predict the adsorption from ternary mixtures of water, nitrogen, and CO2. It is shown that co-adsorption of water has a more negative effect on CO2 adsorption at lower partial pressures of CO2. This fact has significant implications on adsorption process design for low pressure flue gas sources such as coal boiler and natural gas combined cycle flue gas.

Chemistry

What problem does this paper attempt to address?

This paper mainly discusses the behavior of CALF-20 metal-organic framework material in adsorbing carbon dioxide from moist gas. A model based on the Real Adsorption Solution Theory (RAST) was developed in the study to predict the non-ideal multicomponent adsorption of water, carbon dioxide, and nitrogen gas on CALF-20. The authors found that the RAST model accurately simulated non-ideal adsorption and used the model to predict the adsorption behavior of ternary mixtures. The paper points out that CALF-20 can maintain a high carbon dioxide adsorption capacity even at a relative humidity of up to 50%, but the presence of water has a negative impact on carbon dioxide adsorption at low partial pressures. This is of significant importance for the adsorption processes of low-pressure flue gases such as coal-fired power plants and natural gas combined cycle flue gases. Two different adsorbate phase activity coefficient models, the single-parameter Margules model and the recently developed adsorbate non-random two-liquid (aNRTL) theory, were compared to describe the adsorption of non-ideal mixtures. The model parameters were regressed using experimental data, and the applicability of these models in binary and ternary systems was demonstrated. Through sensitivity analysis, the study revealed that when two adsorbate species compete for the same adsorption sites, it is necessary to consider not only the adsorbate-adsorbent interactions but also the "lateral" or adsorbate-adsorbate interactions, especially when species with different Type I and Type V behaviors coexist. Finally, the paper simulated and demonstrated that at lower carbon dioxide partial pressures, humidity has a greater impact on adsorption performance, which is crucial for understanding adsorption design in actual flue gas capture processes.

Real adsorbed solution theory model for the adsorption of CO2 from humid gas on CALF-20

Competitive CO 2 /H 2 O Adsorption on CALF-20

Separation of CO2 and N2 on a hydrophobic metal organic framework CALF-20

Gas adsorption and framework flexibility of CALF-20 explored via experiments and simulations

Impacts of Adsorbed N2 on the Diffusion of CO2 and H2O in CALF-20 Assessed via a Frequency Response Method

Elucidating the Competitive Adsorption of H2O and CO2 in CALF-20: New Insights for Enhanced Carbon Capture Metal-Organic Frameworks.

Unveiling Temperature-Induced Structural Phase Transformations and CO2 Binding Sites in CALF-20

Tailoring Hydrophobicity and Pore Environment in Physisorbents for Improved Carbon Dioxide Capture under High Humidity.

Experimental Demonstration of Humid Post-Combustion CO2 Capture by Vacuum Swing Adsorption Using CALF-20

Binary CO2/H2O adsorption on CO2 capture metal-organic frameworks CALF-20, Al-Fumarate and CAU-10H using microscale dynamic column breakthrough

Trace Flue Gas Contaminants Poison Coordinatively Unsaturated Metal–Organic Frameworks: Implications for CO2Adsorption and Separation

Bi-disperse Adsorption Model of the Performance of Amine Adsorbents for Direct Air Capture

A Thin Film Approach to Rapid, Quantitative Measurements of Mixed-Gas Adsorption Equilibrium in Nanoporous Materials

Unveiling Temperature-Induced Structural Phase Transformations and CO 2 Binding Sites in CALF-20

Performance Evaluation of a Vertical Radial Flow Adsorber Based on Binary Adsorption of CO2 and H2O

Application of metal-organic frameworks for CO2 capture

Evaluation of CO2/H2O Co-Adsorption Models for the Anion Exchange Resin Lewatit VPOC 1065 under Direct Air Capture Conditions Using a Novel Lab Setup

High-Throughput Screening of the CoRE-MOF-2019 Database for CO2 Capture from Wet Flue Gas: A Multi-Scale Modeling Strategy

Abnormal CO2 and H2O Diffusion in CALF-20(Zn) Metal-Organic Framework Angstropores

Reversed CO2/C2H2 separation with ultrahigh carbon dioxide adsorption capacity in Zn-based pillared metal-organic frameworks

Water effect on adsorption carbon capture in metal-organic framework: A molecular simulation