Abstract:Graphite Oxide Cathode for Greener Rechargeable Aluminum Battery In recent years, with the gradual depletion of traditional energy, Secondary battery is being widely researched and applied, and will become a vital force in a plenty variety of new green energy. Aluminium is the most abundant metal in the earth’s crust and each aluminum ion carries three electrons which make the capacity of the aluminum ion battery is expected to be greatly improved. Additionally, aluminum ion battery might offer significant cost savings and safety improvements over the Li-ion battery platform due to the price of aluminum is much lower than that of lithium. However, at present, the working voltage and energy density of the aluminum ion battery is lower than that of the lithium ion battery, so it is urgent to develop a new kind of positive electrode material of aluminum ion battery to improve the electrochemical performance. [1-2] In the work, we report on a novel Al-ion battery system using graphite oxide as the cathode against an aluminium metal anode in an ionic liquid (IL), 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([BMIM]OTF) and aluminum trifluoromethanesulfonate (Al(OTF)3), -based electrolyte. [3] As shown in Figure 1a, the charge and discharge capacity gradually decreased with the increase of cycle number. However, reduction of discharge capacity is much smaller than that of the charge capacity. As shown in Figure 1b, with the increase of cycle number, the discharge capacity is gradually reduced and the coulombic efficiency is gradually increased, which are consistent with the results obtained from the Fig.1a. It can be seen from the Fig.1a that the first discharge capacity of graphite oxide cathode is only 26.7 mAh/g and its electrochemical polarization is relatively large, so we will further improve the oxidation graphite to enhance the electrochemical properties of aluminum ion batteries. Reference 1. Dunn, B.; Kamath, H.; Tarascon, J.M., (2011) Electrical energy storage for the grid: a battery of choices. Science, 334: 928-935 2. Lin, M.C.; Gong, M.; Lu, B.; Wu, Y. P.; Wang, D.Y.; Guan, M.; Angell, M.; Chen, C.;Yang, J.; Hwang, B.J.; Dai, H., (2015) An Ultrafast Rechargeable Aluminium-Ion Battery. Nature, 520: 524-528. 3. wang, H.L.; Gu, S.C.; Bai, Y.; Chen, S.; Wu, F.; Wu, C.; (2016) A high-voltage and non-corrosive ionic liquid electrolyte used in rechargeable aluminum battery. ACS Appl. Mater. Interfaces, 8: 27444-27448. Acknowledgments The experimental research was funded by the National Natural Science Foundation of China (no.51572024, 51372021) Figure 1

Ultrathin Atomic Layer Deposition Al2O3 Coatings on Graphite Cathode Materials for Improving Anti-Self-discharging Al-ion Battery

First-Principles Study of Amorphous Al2O3 ALD Coating in Li-S Battery Electrode Design

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

Atomic layer deposition of TiO 2 on negative electrode for lithium ion batteries

Electrostatic Modification of Expanded Graphite Cathode for High-performance Aluminum-ion Batteries

An alumina stabilized ZnO-graphene anode for lithium ion batteries via atomic layer deposition.

Graphite Oxide Cathode for Greener Rechargeable Aluminum Battery

Improvement on high-temperature electrochemical performance of lithium-ion pouch cells by spatial atomic layer deposition

Prelithiation Treatment of Graphite As Cathode Material for Rechargeable Aluminum Batteries

Atomic Layer Deposition of Al2O3 on LiNi0.68Co0.10Mn0.22O2 for Enhanced Electrochemical Performance

Enhancing Electrochemical Performance of Aluminum‐Oxygen Batteries with Graphene Aerogel Cathode

Suppressed Voltage Decay and Improved Electrochemical Performance by Coating LiAl5O8 on the Surface of Li1.2Mn0.54Ni0.13Co0.13O2

Novel ALD Chemistry Enabled Low-Temperature Synthesis of Lithium Fluoride Coatings for Durable Lithium Anodes

Enhanced cyclability of lithium-ion batteries resulting from atomic layer deposition of Al2O3 on LiFePO4 electrodes

Improving high-temperature performance of lithium-rich cathode by roll-to-roll atomic layer deposition of titania nanocoating for lithium-ion batteries

Atomic Layer Deposition of Al2O3-Ga2O3 Alloy Coatings for Li[Ni0.5Mn0.3Co0.2]O2 Cathode to Improve Rate Performance in Li-Ion Battery.

Performance Enhancement Of A Graphene-Sulfur Composite As A Lithium-Sulfur Battery Electrode By Coating With An Ultrathin Al2o3 Film Via Atomic Layer Deposition

Incorporating Α-Al2o3 Nanodots into Expanded Graphite Anodes Toward Stable Fast Charging for Lithium-Ion Batteries

Optimized atomic layer deposition of homogeneous, conductive Al2O3 coatings for high-nickel NCM containing ready-to-use electrodes

Suppressing Lithium Metal Plating of Graphite Anode with Al2O3 and TiO2 for Fast-Charging Li-Ion Batteries

Roll-To-Roll Atomic Layer Deposition of Titania Nanocoating on Thermally Stabilizing Lithium Nickel Cobalt Manganese Oxide Cathodes for Lithium Ion Batteries