Abstract:Achieving compatibility between cell components is one of the major challenges for the widespread adoption of bulk-type solid-state batteries. In particular, superionic lithium thiophosphate solid electrolytes suffer from oxidation at high voltages when interfaced with state-of-the-art cathode materials. Here, we report on atomic layer deposition (ALD) of conformal HfO2 nanocoatings onto LiNi0.85Co0.10Mn0.05O2 (NCM-851005) cathode material. Based on electrochemical testing in high-loading (pellet-stack) solid-state battery cells, we demonstrate the positive effect of ALD HfO2 coating on the cyclability and stability of NCM-851005. Modification of the coating morphology by postannealing further improved the cycling performance considerably, especially the Coulombic efficiency in the initial cycles and the rate capability. The results demonstrate the ability of ALD to produce high-quality surface films on industrially relevant electrode materials, thus providing a suitable platform for systematic investigations into the functionality of protective coatings in solid-state and other batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01487.Cycling performance of the NCM-851005 coated by ALD of TEMAH/H2O or TEMAH/O3 (for 0, 10, 20, and 100 ALD cycles); HfO2 content from ICP-OES versus ALD cycles; XRD patterns collected from the NCM-851005 before/after coating and the Rietveld refinement profile for the bare NCM-851005; refined structural parameters; O 1s and Ni 2p core-level spectra for the bare and HfO2-coated NCM-851005 before/after heating; high- and low-magnification SEM images of the bare and HfO2-coated NCM-851005 before/after heating; XP spectra of the Hf 4d and 4f core-level regions for the HfO2-coated NCM-851005 before/after heating; calculation of lattice spacings from HRTEM images; determination of the coating thickness, EDS data, and mapping results for the annealed HfO2-coated NCM-851005; cycling performance of bare NCM-851005 in liquid-electrolyte-based LIB coin cells; cycling performance of the O3-treated (uncoated) NCM-851005 before/after heating in SSB cells; cross-sectional SEM imaging and EDS mapping of the cathode and cathode/separator interface of SSB cells using the annealed HfO2-coated NCM-851005 before/after cycling (PDF)This article has not yet been cited by other publications.

Improvement on high-temperature electrochemical performance of lithium-ion pouch cells by spatial atomic layer deposition

Improving high-temperature performance of lithium-rich cathode by roll-to-roll atomic layer deposition of titania nanocoating for lithium-ion batteries

LiNi0.8Co0.15Al0.05O2 Cathodes Exhibiting Improved Capacity Retention and Thermal Stability Due to a Lithium Iron Phosphate Coating

Approaching high-performance pouch cell via fast thermal dissipation and polarization-assisted ion migration

(Digital Presentation) Simultaneous Transforming Residual Lithium Compounds and Stabilizing Surface Lattice Oxygen for Ni-Rich Cathode Via Atomic Layer Deposition and Post-Annealing

Roll-To-Roll Atomic Layer Deposition of Titania Nanocoating on Thermally Stabilizing Lithium Nickel Cobalt Manganese Oxide Cathodes for Lithium Ion Batteries

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

Improving the Cycle Stability of LiNiO2 through Al3+ Doping and LiAlO2 Coating

Significant Improvement on Electrochemical Performance of LiMn2O4 at Elevated Temperature by Atomic Layer Deposition of TiO2 Nanocoating

Ta induced fine tuning of microstructure and interface enabling Ni-rich cathode with unexpected cyclability in pouch-type full cell

Cathode Interfacial Engineering to Enhance Cycling Stability of Rechargeable Lithium-Ion Batteries

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Enhancing the High-Voltage Cycling Performance of LiNi<u>0.5</u>Mn<u>0.3</u>Co<u>0.2</u>O<u>2</u> by Retarding its Interfacial Reaction with Electrolyte by Atomic Layer Deposited Al<u>2</u>O<u>3</u>.

Atomic Layer Deposition of Al2O3 on LiNi0.68Co0.10Mn0.22O2 for Enhanced Electrochemical Performance

Enhancing Structure and Cycling Stability of Ni-rich Layered Oxide Cathodes at Elevated Temperatures Via Dual-Function Surface Modification

Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application

Enhanced interfacial reaction interface stability of Ni-rich cathode materials by fabricating dual-modified layer coating for lithium-ion batteries

Strain engineering of Ni‐rich cathode enables exceptional cyclability in pouch‐type full cells

Enhanced cyclability of lithium-ion batteries resulting from atomic layer deposition of Al2O3 on LiFePO4 electrodes

Reduction of Surface Residual Lithium Compounds for Single-Crystal LiNi0.6Mn0.2Co0.2O2 Via Al2O3 Atomic Layer Deposition and Post-Annealing

High Performance All-Solid-State Batteries with a Ni-Rich NCM Cathode Coated by Atomic Layer Deposition and Lithium Thiophosphate Solid Electrolyte