Abstract:Recently, the large-scale deployment of electric vehicles (EVs) and stationary battery systems has put forward urgent requests for rechargeable batteries with higher energy/power density and longer lifespans. As such, next-generation Li-ion batteries (LiBs) are expected to meet these requirements. The possibility of using Ni-rich high-capacity cathode materials (NMC) can help to achieve that goal, however, they still suffer from significant capacity fade via several chemical and mechanical degradation modes. One is crack formation within secondary particles which leads to parasitic reactions that evolve oxygen and potentially initiate the formation of inactive crystal structures. LiBs mechanical and chemical degradation mechanisms can be extended by applying protective coatings to the cathode’s surface. Many studies explore atomic layer deposition (ALD) for this purpose. However, the complementary molecular layer deposition (MLD) technique might offer the benefit of depositing flexible hybrid coatings that can accommodate potential volume changes of the electrode during the battery cycling. This study reports the deposition of novel organic-inorganic films via the ALD-MLD method. Characterization analysis such as FTIR, XPS, SEM-EDS, and TEM confirmed the film deposition on the surface of the NMC electrode. Besides, the electrochemical results showed the enhancement of the coated electrode, as evidenced by providing a longer life with a 93% capacity retention after 150 cycles (3.0-4.4 V vs. Li/Li+), while the uncoated one retained only 83% of its initial capacity. Moreover, in situ dilatometry showed irreversible volume change for uncoated NMC while it was mostly reversible for coated ones during the cycling. It revealed the dilation behavior of the electrode, resulting in crack formation, which is significantly suppressed for the coated samples. Stable cycling of Ni-rich cathode materials in crucial conditions such as high voltage windows and elevated temperatures is still extremely challenging. To evaluate this, in situ dilatometry was performed at elevated temperatures (40 °C and 55 °C) and higher voltage ranges (3.0-4.6 V). The results confirmed that in both conditions, the dilation behavior of the coated sample is still under control while the capacity is comparable to the uncoated sample. This revealed that the coatings present good lithium-ion kinetics and reduce electrolyte decomposition. Overall, this work showed the liability of the ALD-MLD films deposited on NMC electrodes to mitigate the degradation mechanisms and provides insight into a method that seems promising as a protective and elastic coating for future high-energy lithium-ion battery cathodes. Figure 1

Enhancing the High-Voltage Cycling Performance of LiNi<u>0.5</u>Mn<u>0.3</u>Co<u>0.2</u>O<u>2</u> by Retarding its Interfacial Reaction with Electrolyte by Atomic Layer Deposited Al<u>2</u>O<u>3</u>.

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

(Digital Presentation) Simultaneous Transforming Residual Lithium Compounds and Stabilizing Surface Lattice Oxygen for Ni-Rich Cathode Via Atomic Layer Deposition and Post-Annealing

Atomic Layer Deposition of Al2O3 on LiNi0.68Co0.10Mn0.22O2 for Enhanced Electrochemical Performance

High structure stability and Li-conduction of LiNi0.8Co0.1Mn0.1O2 cathode co-coated by Al2O3 and LiNbO3 for high performance lithium-ion battery

Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application

Improving the cycling and air-storage stability of LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> through integrated surface/interface/doping engineering

Enhanced Electrochemical Stability of High-Voltage Lini0.5mn1.5o4 Cathode by Surface Modification Using Atomic Layer Deposition

Efficacy of atomic layer deposition of Al2O3 on composite LiNi0.8Mn0.1Co0.1O2 electrode for Li-ion batteries

Promoting the Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Via LaAlO3 Coating

Aligned Li+ Tunnels in Core-shell Li(NixMnyCoz)O2@LiFePO4 Enhances Its High Voltage Cycling Stability as Li-ion Battery Cathode.

Enhanced interfacial reaction interface stability of Ni-rich cathode materials by fabricating dual-modified layer coating for lithium-ion batteries

Regulation of Interface Ion Transport by Electron Ionic Conductor Construction toward High‐Voltage and High‐Rate LiNi0.5Co0.2Mn0.3O2 Cathodes in Lithium Ion Battery

Stabilized Positive Electrode Material to Enable High Energy/Power Density Lithium-Ion Batteries

Suppressing the Voltage Fading of Li[Li0.2Ni0.13Co0.13Mn0.54]O-2 Cathode Material Via Al2O3 Coating for Li-Ion Batteries

Enhanced Cycling Performance of Ni-Rich Positive Electrodes (NMC) in Li-Ion Batteries by Reducing Electrolyte Free-Solvent Activity

Multifunctional Integration of Double-Shell Hybrid Nanostructure for Alleviating Surface Degradation of LiNi0.8Co0.1Mn0.1O2 Cathode for Advanced Lithium-Ion Batteries at High Cut-Off Voltage.

Optimized structure stability and cycling performance of LiNi0.8Co0.1Mn0.1O2 through homogeneous nano-thickness Al2O3 coating

Precise Al2O3 Coating on LiNi0.5Co0.2Mn0.3O2 by Atomic Layer Deposition Restrains the Shuttle Effect of Transition Metals in Li-Ion Capacitors

Controllable atomic layer deposition coatings to boost the performance of LiMn x Co y Ni 1 − x − y O 2 in lithium-ion batteries: A review

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Enhancing the High-Voltage Cycling Performance of LiNi&lt;u&gt;0.5&lt;/u&gt;Mn&lt;u&gt;0.3&lt;/u&gt;Co&lt;u&gt;0.2&lt;/u&gt;O&lt;u&gt;2&lt;/u&gt; by Retarding its Interfacial Reaction with Electrolyte by Atomic Layer Deposited Al&lt;u&gt;2&lt;/u&gt;O&lt;u&gt;3&lt;/u&gt;.