Abstract:A significant obstacle that persists in the field of membrane-based gas separation is the development of advanced membranes. In this study, a series of thermally rearranged (TR) membrane precursors (6FDA/ODA/6FAP) with gradient concentration of 6FAP was selected for carbon molecular sieve membranes (TR-CMS) formation. The investigation into the structural evolution from polyimide to TR precursor and finally to CMS membrane utilized various characterization techniques to manipulate the relationship between membrane structure formation and their separation performance. Results show that the structural properties of intermediate TR-polymers, strongly influenced by the –OH content, significantly affect the resultant CMS membrane performance. Specifically, a higher –OH concentration in pristine membrane at 450 °C increases chain rigidity and FFV, leading to a more open pore structure and enhanced gas permeability in TR membranes. Interestingly, TR-CMS derived from increased PBO content exhibits a marked decrease in BET surface area, which correlates with improved molecular sieving performance. This can be attributed to the increased PBO content in the precursor, facilitated degradation upon further heating, thus leads to more orderly structure of the resulting CMS, thereby significantly enhanced molecular sieving performance. The TR-CMS-0.5 sample exhibited the most favorable gas separation performance (P H2 = 3843 and P CO2 = 901 Barrer) as well as high H 2 /CH 4 (6 1 0) and CO 2 /CH 4 (1 4 3) selectivity, which exceeded the 2019 Upper bound line. In addition, the TR-CMS-0.5 demonstrates a remarkable mixed-gas CO 2 /CH 4 (50:50) separating performance that far exceeding its 2018 Upper bound line. In conclusion, the adoption of gradient PBO precursors for preparation of CMS membrane materials show great potential for hydrogen recovery and CO 2 removal from natural gas.

Small Molecule DOPO-p-DP Crosslinked 6Fda-Dam-br-85% Carbon Molecular Sieve Membrane with Superior Aging for Efficient Gas Separation

Carbon Molecular Sieve Gas Separation Membranes from Crosslinkable Bromomethylated 6FDA-DAM Polyimide

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by in Situ Polymerization

Pebax-derived Ultra-Microporous Carbon Molecular Sieve Composite Membrane Assisted by Organic Interlayer for Gas Separation

Gas separation performance of carbon molecular sieve membranes based on 6FDA-mPDA/DABA (3:2) polyimide.

Huge improved gas separation performance of carbon molecular sieve membrane by forming a double crosslinked polyimide precursor

Pyrolysis temperature-regulated gas transport and aging properties in 6FDA-DAM polyimide-derived carbon molecular sieve membranes

Porous Organic Cage Induced High CO2/CH4 Separation Efficiency of Carbon Molecular Sieve Membranes

Carbon molecular sieve hollow fiber composite membrane derived from PMDA-ODA polyimide for gas separation

Carbon molecular sieve membranes derived from crosslinkable polyimides for CO2/CH4 and C2H4/C2H6 separations

Carbon Molecular Sieve Gas Separation Membranes Derived from In-Situ Crosslinked Polyimide Containing Bromine Groups

Carbon Molecular Sieve Membrane with Tunable Microstructure for CO2 Separation: Effect of Multiscale Structures of Polyimide Precursors

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

High-Performance Carbon Molecular Sieve Membrane Derived from a Crown Ether-Containing Co-Polyimide Precursor for Gas Separation

Simultaneously enhanced gas permeability, selectivity and aging stability of carbon molecular sieve membranes by the molecule doping of silicon

Carbon molecular sieve/ZSM-5 mixed matrix membranes with enhanced gas separation performance and the performance recovery of the aging membranes

High-performance Carbon Molecular Sieving Membrane Derived from a Novel Hydroxyl-Containing Polyetherimide Precursor for CO2 Separations

High-Performance Carbon Molecular Sieve Membranes Derived from a PPA-Cross-linked Polyimide Precursor for Gas Separation

Remarkably enhanced molecular sieving effect of carbon molecular sieve membrane by enhancing the concentration of thermally rearranged precursors

Advanced carbon molecular sieve membranes derived from molecularly engineered cross-linkable copolyimide for gas separations

Carbon Molecular Sieve Membranes Derived from Thermally Labile Polymer Containing Blend Polymers and Their Gas Separation Properties