Abstract:The structural engineering and design of 6FDA/BPDA-based copolyimide membranes at a molecular level are developed to achieve advanced membrane materials with improved CO2 plasticization resistance as well as high gas separation performance. The commercially available diamine monomers with/without various electronegative groups (-CH3, –CF3 and -Cl) have been employed to prepare 6FDA/BPDA-based copolyimides via the one-step method. All of the copolyimides show excellent solubility in the common solvent, film-forming ability and thus mechanical properties. More interestingly, the intermolecular charge transfer complex (CTC) effects is finely tuned as confirmed by the fluorescence emission spectrum. The introducing of polar chloride groups in the copolyimides could significantly strengthen the CTC effects to prevent the intrusion of condensable CO2 and limit polymeric chain movements. Thus, the membrane based on the 2,2′,5,5′-tetrachlorobenzidine (e.g. 6FDA:BPDA-TSN:TCDB (1:1:1:1)) shows the best carbon dioxide (CO2) plasticization resistance and slowest physical aging without sacrificing gas separation performance versus the membrane having weak polar groups. The CO2 plasticization pressure as high as 350 psi has been observed for the 6FDA:BPDA-TSN:TCDB membrane with polar chloride groups. This value is much higher than that of the copolyimide membranes with –CH3 or –CF3 groups ranging from 100 psi to 200 psi. Moreover, this membrane shows a good gas separation performance, e.g. CO2 permeability of 45.7 barrer and CO2/CH4 ideal selectivity of 35.2 surpassing the commercial cellulose acetate and Matrimid. Such structurally defined polymer with good mechanical strength, plasticization resistance and solubility harnesses the full potential of promising gas separation membrane materials for hollow fiber spinning. This work offers structural engineering guidance for the preparation of high-performance polymers with good tolerance to CO2-induced plasticization.

Double-decker-shaped phenyl-substituted silsesquioxane (DDSQ)-based nanocomposite polyimide membranes with tunable gas permeability and good aging resistance

Highly Selective Benzimidazole-Based Polyimide/Ionic Polyimide Membranes for Pure- and Mixed-Gas CO2/CH4 Separation

Mechanically Strong, Thermally Stable Gas Barrier Polyimide Membranes Derived from Carbon Nanotube-Based Nanofluids

Pyrolysis temperature-regulated gas transport and aging properties in 6FDA-DAM polyimide-derived carbon molecular sieve membranes

Synthesis and gas separation properties of polyimide membranes derived from oxygencyclic pseudo-Tröger's base

Improving gas permeation performance of PDMS by incorporating hollow polyimide nanoparticles with microporous shells and preparing defect-free composite membranes for gas separation

High Gas Permeability in Aged Superglassy Membranes with Nanosized UiO-66-NH2 /cPIM-1 Network Fillers

Structural engineering on copolyimide membranes for improved gas separation performance

From a hyperbranched polyimide to a microporous network polyimide via reaction temperature change and its application in gas separation membranes

Asymmetric copolyimide membranes fabricated by nonsolvent-induced phase separation for He/CH4 and He/N2 separation

Finely tuning the microporosity in dual thermally crosslinked polyimide membranes for plasticization resistance gas separations

Gas separation properties of PMDA/ODA polyimide membranes filling with polymeric nanoparticles

Carbon molecular sieve membranes derived from crosslinkable polyimides for CO2/CH4 and C2H4/C2H6 separations

Carbon molecular sieve hollow fiber composite membrane derived from PMDA-ODA polyimide for gas separation

Synthesis of polyimides containing Tröger's Base and triphenylmethane moieties with tunable fractional free volume for CO 2 separation

Mixed matrix composite membranes with MOF-protruding structure for efficient CO 2 separation

In-situ crosslinking of a novel conjugated dialkynyl-based polyimide for high performance carbon molecular sieve membrane

Ultrapermeable membranes based on connected cluster of hollow polydimethylsiloxane nanoparticles for gas separation

Enhanced polyphosphazene membranes for CO2/CH4 separation via molecular design

CO2/N2 Separation Properties of Polyimide-Based Mixed-Matrix Membranes Comprising UiO-66 with Various Functionalities

Hydrogen bonding-induced 6FDA-DABA/TB polymer blends for high performance gas separation membranes