Abstract:The stability of ventilated supercavitation is strongly influenced by gas leakage characteristics of the cavity. Here we conduct a systematic investigation of such characteristics under different closure conditions including re-entrant jet (RJ), quad vortex (QV), twin vortex (TV), and pulsating twin vortex (PTV). Using high-speed digital inline holography (DIH), all the individual bubbles shed from the cavity are imaged downstream and are used to quantify the instantaneous gas leakage from the cavity. In general, the supercavity gas leakage exhibits significant fluctuations under all closure types with the instantaneous leakage rate spiking up to 20 times of the ventilation input under RJ and QV closures. However, the magnitude and occurrence rate of such excessive gas leakage vary substantially across different closures, tunnel speeds, and ventilation conditions. Particularly, as the supercavity transitions from RJ, to QV, TV, and PTV with increasing ventilation or decreasing tunnel speed, the relative excessive gas leakage decreases sharply from RJ to QV, plateaus from QV to TV, and drops again from TV to PTV. Correspondingly, the occurrence frequency of such excessive leakage first exhibits a double peak distribution under RJ, migrates to a single peak mode under QV and TV, and eventually transitions to a distribution with a broadened peak at a higher frequency under PTV. These trends can be explained by the flow instabilities associated with three distinct gas leakage mechanisms. Subsequently, two metrics are introduced to quantify the relative change of ventilation needed to compensate for the change of extra gas loss and the predictability of the occurrence of excessive gas leakage, respectively. Based on these metrics, we suggest that the supercavity operating under TV closure with moderate ventilation is optimal for ventilation-based controls of supercavity stability.

Investigation of the Intrinsic Outgassing Rates for Narrow Structured Vacuum Devices under Readsorption Effect

Numerical Analysis of High Vacuum Packaging Efficiency for Narrow Structured Devices

The Design of A Degassing Pump Based on Numerical and Experimental Research

Modeling Investigation on Gas Backflow Performances in Screw Vacuum Pump

Outgassing Characteristics of Ceramic Shell Material and Microchannel Plates of Third-Generation Low-Light-Level Image Intensifiers

Measurement platform for outgassing rate of insulation materials

Outgassing rate comparison of seven geometrically similar vacuum chambers of different materials and heat treatments

An Investigation into Oil-Gas Two-Phase Leakage Flow Through Micro Gaps in Oil-Injected Compressors

Outgassing properties of vacuum materials for particle accelerators

Investigation of the Ejector Nozzle in Refrigeration System

Probing into gas leakage characteristics of ventilated supercavity through bubbly wake measurement

The effect of heat treatments and coatings on the outgassing rate of stainless steel chambers

Experimental Investigation on the Cavity Evolution and Dynamics with Special Emphasis on the Development Stage of Ventilated Partial Cavitating Flow

Experimental Investigation of Two Ventilated Cavities with Effect of Froude Number and Gas Entrainment

Theoretical and Experimental Study of Dry Scroll Vacuum Pump

Influence of the Capillary Design and Conditions upon the Transmission Efficiency of a Portable Ion Trap Mass Spectrometer

An Investigation into the Effect of Gas Adsorption on Safety Valve Set Pressure Variations

Effects of stable clearances on backflow in the variable-pitch screw vacuum pump

STUDY ON THE RESIDUAL GAS IN GLASS EVACUATED COLLECTOR TUBES WITH VARIOUS GETTERS

Experimental investigation of effects of extremely low pumping speed on isothermal performance and filling ratio of sintered copper heat pipe

Outgassing Rates and Compositions of the Released Gases from Optical Fiber Panel and Photocathode Glass Used for Low-light-level Image Intensifiers