Abstract:Vacuum stability is one of the key issues in the design of particle accelerators, especially high-energy super proton-proton colliders. The synchrotron radiation generated by proton beams in the bending area will desorb and crack the gas molecules which have adsorbed on the wall of the cold bore. The collision or scattering between the proton beam and the desorbed gas molecules may result in the degradation of the beam quality and the reduction of beam life time, and even the collapse of the beam. Usually a copper coated stainless steel beam screen is installed in the cold bore to intercept synchrotron radiation and reduce gas desorption. Based on the design parameters of the Super Proton-Proton Collider, in this paper the source of gas in the beam screen is analyzed. By considering the photon-induced desorption process and the gas molecule cracking process, the gas dynamic model in the beam screen is established. Moreover, the calculation of the evolution of the gas density in the beam screen with the beam operating time is carried out, and the effect of TiZrV non-evaporable getter film coated beam screen on the dynamic gas density is explored. The results show that H-2 is the main desorption gas in the beam, the next is CO, while the molecular density of CO2 and CH4 are limited by molecular cracking. The maximum gas density in the beam screen appears at the initial stage of operation, and the gas density decreases with time going by. In order to strengthen adsorption and reduce desorption, TiZrV coated beam screen is discussed in this paper. In the case of TiZrV coated stainless steel beam screen, the maximum equivalent H-2 density is about two order of magnitude lower than in the case of copper coated stainless steel beam screen. The non-evaporable getter(NEG) for beam screen material can significantly improve vacuum performance. The calculation results can qualitatively reflect the dynamic vacuum evolution in the beam screen during the beam operation and provide a reference for designing vacuum systems.

Outgassing properties of vacuum materials for particle accelerators

Vacuum for accelerators: introduction to materials and properties

Vacuum Acceptance Tests for Particle Accelerator Equipment

Optimizing Preloading Pressure of Pre-Charged Gas for Isobaric Gas-Tight Hydrothermal Samplers

Investigation of the Intrinsic Outgassing Rates for Narrow Structured Vacuum Devices under Readsorption Effect

High pressure gas vessels for neutron scattering experiments

Ion getter pumps

Materials adopted for particle beam windows in relevant experimental facilities

High Voltage Insulation and Gas Absorption of Polymers in High Pressure Argon and Xenon Gases

Outgassing Characteristics of Ceramic Shell Material and Microchannel Plates of Third-Generation Low-Light-Level Image Intensifiers

Numerical Analysis of High Vacuum Packaging Efficiency for Narrow Structured Devices

Accelerator Vacuum Windows: A Review of Past Research and a Strategy for the Development of a New Design for Improved Safety and Longevity for Particle Accelerators

Sub-THz Characterization of Technical Surfaces for Particle Accelerator Vacuum Chambers

Some Key Issues of Vacuum System Design in Accelerators and Colliders

Particle radiation effects on shape memory alloy couplers for ultra-high vacuum sealing: a preliminary study

High Voltage Breakdown Induced by Outgassing of Space Materials

Outgassing Rates and Compositions of the Released Gases from Optical Fiber Panel and Photocathode Glass Used for Low-light-level Image Intensifiers

Analytical methods for vacuum simulations in high energy accelerators for future machines based on the LHC performance

Gas Density Evolution in Beam Screen of Super Proton-Proton Collider

Vacuum Pumping Performance Comparison of Non-Evaporable Getter Thin Films Deposited Using Argon and Krypton as Sputtering Gases

Breakdown Initiation and Electrical Strength of a Vacuum Insulating System in the Environment of Selected Noble Gases at AC Voltage