Abstract:Understanding the mechanical properties of polymer nanocomposite materials is essential for industrial use. Particularly, the determination of the polymer modulus at the nanofiller-polymer interphase is important for optimizing the interfacial mechanical properties. Nanoindentation via Atomic Force Microscopy (AFM) is well established for measuring the modulus of the interphase region with nanoscale spatial resolution. However, indentation into heterogeneous materials presents a confounding issue often referred to as the "substrate effect", i.e., the structural stress field caused by the rigid body is convoluted with the actual modulus of the interphase region. While finite element analysis (FEA)-based methods can be used to deconvolute the interphase modulus from measured apparent modulus-distance profiles, the experimental validation of this method is still needed. Here, we provide this validation using AFM nanoindentation on a layered model composite which consists of three layers with different moduli to recapitulate the properties of the matrix, the filler, and the interphase of real polymer nanocomposites. By systematically varying the thickness of the “artificial” interphase layer and the AFM probe radius, we obtain modulus - distance profiles over a wide range of indentation conditions. We validate a method to deconvolute the substrate effect using an empirically derived master curve obtained from FEA analysis. Furthermore, we showed that the effect of the artificial interphase on modulus - distance profiles can be distinguished only if the interphase layer is thick enough compared to the contact radius of the probe. Finally, we established an innovative and quantitative framework to predict the interphase thickness from mechanical nanoindentation measurements, and we discussed the lower, practical limit for interphase thickness determination. In summary, we provide a broadly applicable method to extract interphase mechanical properties of multiphase soft materials, and practical guidelines for choosing optimal characterization conditions.

AFM-based Adhesive Indentation of Polymer Brushes: A Phenomenological Approach

Atomic Force Microscopy of Polymer Brushes: Insights into Controversies

Molecular Dynamics Simulation of Form Measurement Process of Soft Materials Using Atomic Force Microscope

AFM-based Spherical Indentation of a Brush-Coated Soft Material: Modeling the Bottom Effect.

Using the Adhesive Interaction Between Atomic Force Microscopy Tips and Polymer Surfaces to Measure the Elastic Modulus of Compliant Samples

Direct Measurement of Plowing Friction and Wear of a Polymer Thin Film Using the Atomic Force Microscope

Theory of Adhesive Contact on Multi-Ferroic Composite Materials: Conical Indenter

Pushing AFM to the boundaries — interphase mechanical property measurements near a rigid body

Atomic Force Microscopy-Based Indentation of Cells: Modelling the Effect of a Pericellular Coat

In Situ Nanoindentation Mechanical Property of Films by Atomic Force Microscope

AFM Nanoindentation of Stiff Inhomogeneous Layer on Polymeric Substrate

From Adhesion to Wetting: Contact Mechanics at the Surfaces of Super-Soft Brush-Like Elastomers

Influence of Friction in Material Characterization in Microindentation Measurement.

A comprehensive study of AFM stiffness measurements on inclined surfaces: theoretical, numerical, and experimental evaluation using a Hertz approach

Characterizing Interfacial Fracture Toughness Using AFM

Features of the study of binder state near the filler particles in elastomeric composites using an atomic-force microscope

Investigation of Near-Surface Mechanical Properties of Materials Using Atomic Force Microscopy

Identification and design of novel polymer-based mechanical transducers: A nano-structural model for thin film indentation

Probabilistic Estimation of Mechanical Properties of Biomaterials Using Atomic Force Microscopy

Modulating adhesion strength in multi-ferroic composite materials: Insights from adhesive contact with arbitrary profile indenters

An atomic interaction-based adhesive contact model for shallow nanoindentation and nanoscratch