Abstract:To heighten the oxidation inhibition capacity of HfB2-SiC coating, film-forming regulation of the self-formed compound layer was utilized to enhance the dynamic stability and the oxygen hindering capacity of the coating. The oxidation process of the HfB2-SiC coating in air from room temperature to 1700 °C can be divided into the lower temperature oxidation zone, the medium temperature protection zone and the high temperature corrosion zone. The oxidation activity of the coatings was significantly weakened in the medium temperature oxidation protection zone from 1100 °C to 1400 °C, which was selected as the film-forming regulation temperature region to ensure the lower film-forming wastage of the coatings. When the film-forming temperature was 1200 °C, the coating was uniformly covered by the glass layer with fewer defects. The values of active factor and inerting factor of the HfB2-SiC coating after film-forming at 1200 °C were 0.151 and 0.953 × 10−6 g cm−2 s−1, respectively, which show the lowest film-forming wastage of the coating. With further ascending the film-forming temperature, a large number of pores and cracks generated on the glass layer owing to the evaporation and release of the gaseous byproducts, which destroyed the structure of the glass layer and aggravated the oxidation wastage of the coating. With increasing the film-forming time at 1200 °C for 360 min, the protection efficiency of the HfB2-SiC coating increased to 99.13%, the oxygen permeability and carbon loss rate decreased by 79.6% and 67.8%, respectively, which slowed down the oxidation activity and improved the dynamic stability of the coating during oxidation.

Cyclic Oxidation Resistance and Self-Healing Properties of HfB2-Doped Glass Composite Coatings at 900°C

Oxygen barrier resistance of HfB2-MoSi2-TaB2 coatings in a wide temperature region

Enhanced oxidation resistance of HfB2‐SiC‐ZrSi2 coating at 1700°C through low‐loss film‐forming treatment

Oxidation inhibition behaviors of the HfB2-SiC-TaSi2 coating for carbon structural materials at 1700 °C

Oxygen blocking enhancement of HfB2-SiC coating using HfB2-HfSi2 alloyed composite powders by self-propagating high-temperature synthesis

Fabrication of low-density carbon-bonded carbon fiber composites with an Hf-based coating for high temperature applications

Enhancing oxygen‐blocking properties of HfB2‐MoSi2‐SiC coating by CeO2 modification

Temperature-responsive self-healing coating with excellent resistances to oxidation and thermal shock from core-shell B2O3@SiO2 microcapsule

Effect of film-forming regulation of the self-formed compound layer on the oxidation inhibition capacity of HfB2-SiC coating

Effective Anti-Oxidation Repair Coating for C/C Brake Materials Comprising Lead-Borosilicate and Bismuth-Borosilicate Glass

High temperature oxidation behaviors of Ir-Ni-Ta-(B) metallic glass

Self-densification behavior, interfacial bonding and cyclic ablation resistance of HfSi2-ZrSi2 modified SiC/ZrB2-SiC/SiC coating for Cf/SiC composite

Achieving the synergy of superior damage tolerance and oxidation resistance of 2D Cf/ZrB2-SiC composites via fiber heat treatment

Dual-feedback Healing Mechanism Redefining Anti-Oxidation Coatings in Fiber Reinforced Composites

An oxidation protective coating prepared by SiC densifying HfB2-SiC skeleton for SiC-coated C/C composites at 1473, 1773, and 1973 K

Cyclic ablation resistance at 2300 °C of (Hf0.4Zr0.4Ta0.2)B2-SiC-Si coating for C/SiC composites prepared by SiC-assisted reactive infiltration of silicon

Structural characteristics and high-temperature oxidation behaviour of nano-HfO2-doped thermal barrier coatings

Deposition voltages on the phase evolutions, microstructures, and oxidation behaviors of thermal-resistance Glass-MoSi2-SiC coating

Oxidation Behavior of a Ti16.7Zr16.7Hf16.7Cu16.7Ni16.7Be16.7 High-Entropy Bulk Metallic Glass

Oxidation inhibition behaviors of HfB 2 ‐MoSi 2 ‐SiC oxygen blocking coating prepared by spark plasma sintering

Preparation of MoSi2-modified HfB2-SiC ultra high temperature ceramic anti-oxidation coatings by liquid phase sintering