Abstract:To heighten the oxidation inhibition capacity of HfB2-SiC coating, film-forming regulation of the self-formed compound layer was utilized to enhance the dynamic stability and the oxygen hindering capacity of the coating. The oxidation process of the HfB2-SiC coating in air from room temperature to 1700 °C can be divided into the lower temperature oxidation zone, the medium temperature protection zone and the high temperature corrosion zone. The oxidation activity of the coatings was significantly weakened in the medium temperature oxidation protection zone from 1100 °C to 1400 °C, which was selected as the film-forming regulation temperature region to ensure the lower film-forming wastage of the coatings. When the film-forming temperature was 1200 °C, the coating was uniformly covered by the glass layer with fewer defects. The values of active factor and inerting factor of the HfB2-SiC coating after film-forming at 1200 °C were 0.151 and 0.953 × 10−6 g cm−2 s−1, respectively, which show the lowest film-forming wastage of the coating. With further ascending the film-forming temperature, a large number of pores and cracks generated on the glass layer owing to the evaporation and release of the gaseous byproducts, which destroyed the structure of the glass layer and aggravated the oxidation wastage of the coating. With increasing the film-forming time at 1200 °C for 360 min, the protection efficiency of the HfB2-SiC coating increased to 99.13%, the oxygen permeability and carbon loss rate decreased by 79.6% and 67.8%, respectively, which slowed down the oxidation activity and improved the dynamic stability of the coating during oxidation.

Oxygen blocking enhancement of HfB2-SiC coating using HfB2-HfSi2 alloyed composite powders by self-propagating high-temperature synthesis

Oxidation inhibition behaviors of HfB 2 ‐MoSi 2 ‐SiC oxygen blocking coating prepared by spark plasma sintering

Oxidation inhibition behaviors of the HfB2-SiC-TaSi2 coating for carbon structural materials at 1700 °C

Effect of film-forming regulation of the self-formed compound layer on the oxidation inhibition capacity of HfB2-SiC coating

Preparation of MoSi2-modified HfB2-SiC ultra high temperature ceramic anti-oxidation coatings by liquid phase sintering

Enhancing oxygen‐blocking properties of HfB2‐MoSi2‐SiC coating by CeO2 modification

Enhanced High-Temperature Oxidation Resistance of HfSi2-modified Silicon Based Multilayer Ceramic Coating on Nb Alloy Prepared by a Novel Strategy

An oxidation protective coating prepared by SiC densifying HfB2-SiC skeleton for SiC-coated C/C composites at 1473, 1773, and 1973 K

Enhanced high-temperature oxidation resistance of HfSi 2 -modified silicon based multilayer ceramic coating on Nb alloy prepared by a novel strategy

Preparation of ZrB2-MoSi2 high oxygen resistant coating using nonequilibrium state powders by self-propagating high-temperature synthesis

Investigation on the oxidation and ablation behaviors of HfB2-SiC-Si/SiC-Si coatings for carbon/carbon composites

Enhanced oxidation resistance of HfB2‐SiC‐ZrSi2 coating at 1700°C through low‐loss film‐forming treatment

Oxygen barrier resistance of HfB2-MoSi2-TaB2 coatings in a wide temperature region

WSi2 modified HfB2-SiC coating: Microstructure and ablation resistance

Self-densification behavior, interfacial bonding and cyclic ablation resistance of HfSi2-ZrSi2 modified SiC/ZrB2-SiC/SiC coating for Cf/SiC composite

Effect of HfO2 framework on steam oxidation behavior of HfO2 doped Si coating at high temperatures

Oxidation ablation resistance of ZrB2-HfB2-SiC-TaSi2 coating prepared on C/C composite surface

Ultra-high Temperature Ceramic TaB2–TaC–SiC Coating for Oxidation Protection of SiC-coated Carbon/carbon Composites

Oxidation Resistance of a Si-TiSi2-MoSi2-TiB2-CaSi2 Coating on a Cf/C-SiC Substrate in High-Speed High-Enthalpy Air Plasma Flows

Experimental and first-principles simulation study on oxidation behavior at 1700 °C of Lu2O3–SiC-HfB2 ternary coating for SiC coated carbon/carbon composites

Cyclic ablation resistance at 2300 °C of (Hf0.4Zr0.4Ta0.2)B2-SiC-Si coating for C/SiC composites prepared by SiC-assisted reactive infiltration of silicon