Abstract:China Spallation Neutron Source(CSNS) beam power will upgrade to 500 kW(CSNS-II), energy gain of H- linac will up to 300 MeV from 80 MeV, and the 648 MHz βg=0.6 5-cell superconducting elliptical cavity will be adopted to accelerate the H- from 150 to 300 MeV. Accompanied with the advantage of high accelerating gradient, simple structure, easy post-processing, weak stiffeness and detuning is the shortcoming of elliptical cavity, this study analysis detuning characteristic of the elliptical cavity. With code COMSOL Multiphysics, helium pressure sensitivity coefficient KP and lorentz force detuning factor KL of bare cavity was calculated under two end fixed conditions, KP=–45.705 Hz/mbar(1 mbar=100 Pa) and KL=1.574 Hz/(MV/m)2. Stiffener ring was designed and optimized to reduce the Helium pressure sensitivity coefficient and lorentz force detuning factor, and double ring was chosen to improve the detuning of elliptical cavity at last by vast calculation and analysis, the position of stiffener ring was optimized at 75 and 120 mm under two end fixed boundary, Helium pressure sensitivity coefficient drop down to KP=6 Hz/mbar, lorentz force detuning factor drop down to KL=0.43 Hz/(MV/m)2. Moreover, elastic boundary was used to analyze helium pressure sensitivity coefficient and lorentz force detuning factor, more realistic results were got under tuner end 30 kN/mm boundary and the other end fixed condition, KP=4.8 Hz/mbar and KL=1.99 Hz/(MV/m)2, meet engineering requirements. In addition, dynamic lorentz force detuning was analyzed qualitatively with code CST. And natural frequency of cavity was calculated by code Workbench, results show that nature frequency is far from RF pulse repetition rate and ambient vibration frequency, no resonance happen.

Frequency detuning analysis of drift tube linac for CSNS

The design and construction of CSNS drift tube linac

Detuning Analysis of the Superconducting Elliptical Cavity for CSNS-Ⅱ Linac

DTL construction status of China Spallation Neutron Source

Updating the CSNS injector linac to 250 MeV with superconducting double-spoke cavities

Quality Factor and Power Loss of the CSNS DTL

Preliminary Design of CSNS-II Linac SRF LLRF

Radio frequency design and multipacting study of superconducting elliptical cavity for CSNS-II linac

Thermomechanical Responses of the Drift Tube to Beam Loss at the China Spallation Neutron Source

Operation Experience of the CSNS DTL

Development of the double spoke cavity prototype for CSNS-II

Thermal Analysis for Wire Scanners in the CSNS Linac

New operation analysis method for vacuum tube driving a tuned cavity

CSNS-II multi-harmonic LLRF upgrade and commissioning

Status of the Beam Instrumentation System of CSNS

The Design and Initial Testing of the Beam Phase and Energy Measurement System for DTL in the Proton Accelerator of CSNS

China Spallation Neutron Source: Design, R&D, and Outlook

Design of the Input Power Coupler for Boron Neutron Capture Therapy Drift Tube Linac

Proposal and design of 81.25 MHz heavy ion drift tube linacs for BISOL

Tune optimization for alleviating space charge effects and suppressing beam instability at the RCS of CSNS