Abstract:High‐voltage Li‐metal batteries often suffer from severe capacity fading due to the degradation of the cathode at high voltages and parasitic reactions between the electrolyte solution and both electrodes. The combination of a morphology‐engineered Ni‐rich cathode and the formation of a high‐quality surface film ensures long‐term stability by minimizing nonuniformity. Combining Li‐metal anodes (LMAs) with high‐voltage Ni‐rich layered‐oxide cathodes is a promising approach to realizing high‐energy‐density Li secondary batteries. However, these systems experience severe capacity decay due to structural degradation of high‐voltage cathodes and side reactions of electrolyte solutions with both electrodes. Herein, the use of multi‐functional additives in fluoroethylene carbonate‐based electrolyte solutions that enable the operation of successfully rechargeable high‐voltage (4.5 V) Li‐metal batteries (LMBs) with high areal capacity (>4 mAh cm−2) are reported. Customized electrolyte solutions are pivotal in passivating the electrodes, minimizing microcrack formation, and ensuring that current is uniformly distributed within cathode particles. The developed electrolyte solution protects the LMA by forming a very stable and effective solid–electrolyte interphase. Together with the Li[Ni0.78Co0.1Mn0.12]O2 cathode material, which is composed of radially aligned rod‐shaped primary particles, the developed high‐voltage LMB containing 20 mg cm−2 of cathode material delivers a high specific capacity of 230 mAh g−1 at 0.1 C and retains >86% of its initial capacity after 200 cycles at 0.5 C. This study highlights the significance of controlling the interfacial structure via electrolyte solution modification and the use of cathode materials with engineered morphologies that enhance mechanical stability.

Stable Cycling of LiNi0.9Co0.05Mn0.05O2/lithium Metal Batteries Enabled by Synergistic Tuning the Surface Stability of Cathode/anode

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Realizing Superior Cycling Stability of Ni-Rich Layered Cathode by Combination of Grain Boundary Engineering and Surface Coating

Invoking Interfacial Engineering Boosts Structural Stability Empowering Exceptional Cyclability of Ni‐Rich Cathode

Improving the cycling and air-storage stability of LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> through integrated surface/interface/doping engineering

Tuning the surface of LiNi0.8Co0.1Mn0.1O2 primary particle with lithium boron oxide toward stable cycling

Stabilizing the Oxygen Ions and Alleviating the Surface Structure Evolution of Li-Excess Layered Cathode for Advanced Lithium-Ion Batteries

Enabling Superior Electrochemical Performance of Lithium-Rich Li1.2Ni0.2Mn0.6O2 Cathode Materials by Surface Integration

Superior Stability Secured by a Four-Phase Cathode Electrolyte Interface on a Ni-Rich Cathode for Lithium Ion Batteries

Enhancement on Structural Stability of Ni-rich Cathode Materials by In-Situ Fabricating Dual-Modified Layer for Lithium-Ion Batteries

Improving Cycling Stability of Ni‐Rich Cathode for Lithium‐Metal Batteries via Interphases Tunning

Single–crystalline LiNi0.8Co0.1Mn0.1O2 Stabilized by F–doping–induced Superlattice for 4.8 V Lithium–ion Batteries

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Multifunctional Surface-Integrated Structures Enabling Layered Oxide Cathodes with Stable High-Voltage Cycling

Tailoring electrolyte enables high-voltage Ni-rich NCM cathode against aggressive cathode chemistries for Li-ion batteries

Enhanced Interfacial Stability of Ni-rich Cathode for Li-ion Batteries Towards Excellent High-Voltage Performance

In-situ Surface Modification to Stabilize Ni-rich Layered Oxide Cathode with Functional Electrolyte

Alleviating Surface Degradation of Nickel-Rich Layered Oxide Cathode Material by Encapsulating with Nanoscale Li-Ions/Electrons Superionic Conductors Hybrid Membrane for Advanced Li-Ion Batteries.

Reinforcing the Stability of Cobalt-free Lithium-rich Layered Oxides via Li-poor Ni-rich Surface Transformation

Stabilizing Cathode Materials of Lithium-Ion Batteries by Controlling Interstitial Sites on the Surface

A well-matched MgNiO2 surface heterointerface layer to enhance the cycling stability of cobalt-free Li-rich Mn-based cathode materials