Abstract:The foamed alumina ceramics with excellent sound absorption performance especially at low frequency were fabricated by gelcasting-foaming process which gelled at room temperature. This process was simpler and more environmental-friendly than conventional gelcasting process because only a very small amount of organics were used and then green bodies could be sintered directly without binder removal process. The effects of foaming agent on porosity, pore size, compressive strength and sound absorption characteristics of the porous ceramics with different air-gap depths were discussed. The results showed that with the increasing of foaming agent content from 0.10 to 0.25 wt%, the porous ceramics had higher porosity, larger pore size, smaller compressive strength and better sound absorption characteristics. But the foaming agent's effect got less significant than before when it's amount was more than 0.25 wt%. The sound absorption peak of foamed ceramics shifted towards higher frequency as increasing foaming agent content, but it shifted towards lower frequency as increasing the air-gap depth. And within the data range of this study, increasing porosity could improve the sound absorption characteristic of the ceramics with an air gap. The ceramic with foaming agent content of 0.25 wt% and air-gap depth of 80mm had the best sound absorption whose maximum sound absorption coefficient and noise reduction coefficient is 0.99 at 400 Hz and 0.79 respectively, and its mean sound absorption coefficient at 50-1000 Hz is similar to 0.6. (C) 2020 The Ceramic Society of Japan. All rights reserved.

Enhanced Sound Absorption Performance of Porous Ceramics with Closed-Pore Structure

Anisotropic Porous Ceramic Material with Hierarchical Architecture for Thermal Insulation

Synthesis of macroporous ceramic with enhanced sound absorption capability in low and medium frequency

Preparation of Pore-Controllable Zirconium Carbide Ceramics with Tunable Mechanical Strength, Thermal Conductivity and Sound Absorption Coefficient

Sound Absorption Properties of Ceramic Hollow Sphere Structures with Micro-Sized Open Cell

Formation of closed pore structure in CaO-MgO-Al2O3-SiO2 (CMAS) porous glass-ceramics via Fe2O3 modified foaming for thermal insulation

Preparation and Properties of High Sound-Absorbing Porous Ceramics Reinforced by In Situ Mullite Whisker from Construction Waste

Enhanced sound absorption properties of porous ceramics modified by graphene oxide films

Diatomite-based porous ceramics with high apparent porosity: Pore structure modification using calcium carbonate

The development of high-strength closed-pore foam ceramics and experimental study on its mechanical properties

Enhancing thermal insulation and mechanical strength of porous ceramic through size-graded MA Hollow Spheres

Porous Si3N4-based Ceramics with Uniform Pore Structure Originated from Single-Shell Hollow Microspheres

Enhanced Electromagnetic Wave Absorption of SiOC/Porous Carbon Composites

Enhanced mechanical and wave‐absorption properties of SiC–Si3N4–FeSi porous ceramics by introducing Al

Fabrication of foamed ceramics with enhanced compressive strength and low thermal conductivity via a simple route

Selective microwave absorption of SiC–Si 3 N 4 porous ceramics prepared by sacrificial template method

Selective microwave absorption of SiC–Si3N4 porous ceramics prepared by sacrificial template method

In situ growth magnesium borate whiskers and synthesis of porous ceramics for sound-absorbing

High-strength and corrosion-resistant Al2O3 ceramics with excellent closed-cell structure

High sound absorption characteristics of foamed alumina ceramics fabricated by gelcasting-foaming process

Enhanced Sound Absorption Properties of Ceramics with Graphene Oxide Composites