Abstract:A composite acoustic metastructure consisting of double porous materials and resonators with extended tubes is proposed to seek low-frequency broadband sound absorption, considering the low-frequency absorption of resonators and medium–high frequency absorption of porous materials. Based on the double porosity theory and finite element simulation, the sound absorption performance of the composite metastructure is investigated, and the numerical results are verified by experiments. It has been demonstrated that the metastructure with porous materials arranged vertically or horizontally can exhibit a sound absorption coefficient greater than 0.5 at 265–2000 Hz and greater than 0.8 at 760–2000 Hz, which is significantly superior to the existing sound absorption structure with resonator and porous material with the same thickness. The dependence of the sound absorption performance on the geometric parameters of the extended tubes and the porous materials is revealed. On the premise of keeping the cross-section shape of the extended tube and the arrangement of the porous material unchanged, sound absorption performance at low frequencies depends on the diameter, length, and porosity of the extended tubes, whereas sound absorption performance at medium–high frequencies is primarily determined by the percentage of porous materials. Finally, an improved multiple population genetic algorithm (IMPGA), improved by introducing a weight factor function, is used to optimize the parameters of the composite metastructure in a finite space with a thickness of 50 mm, and the sound absorption coefficient was greater than 0.5 in even lower and broader frequency range of [225,2000] Hz. Additionally, the IMPGA can be adjusted to achieve broadband sound absorption within the target frequency range. It provides a new exploration for acoustic material design for low-frequency broadband sound absorption.

Synthesis of macroporous ceramic with enhanced sound absorption capability in low and medium frequency

Enhanced sound absorption properties of porous ceramics modified by graphene oxide films

In situ growth magnesium borate whiskers and synthesis of porous ceramics for sound-absorbing

Enhanced Sound Absorption Properties of Ceramics with Graphene Oxide Composites

Preparation and Properties of High Sound-Absorbing Porous Ceramics Reinforced by In Situ Mullite Whisker from Construction Waste

Excellent broadband sound absorption in composites manufactured by embedding piezoelectric polymer aerogels in porous ceramics

Ultra-broadband sound absorption performance of a multi-cavity composite structure filled with polyurethane

Hierarchical pore structure based on cellulose nanofiber/melamine composite foam with enhanced sound absorption performance

Freeze-cast porous Al2O3/MgO ceramics as potential acoustic sound absorption

Low-frequency broadband sound absorption of the metastructure with extended tube resonators and porous materials

Sound absorption performance based on Auxetic microstructure model: a parametric study

Diatomite-based porous ceramics with high apparent porosity: Pore structure modification using calcium carbonate

Porous Si3N4-based Ceramics with Uniform Pore Structure Originated from Single-Shell Hollow Microspheres

Ultra-thin Zr-MOF/PVA/Melamine composites with remarkable sound attenuation effects

Sound Absorption by Acoustic Microlattice with Optimized Pore Configuration

Porous ceramics based on high-thermal-stability Al2O3–ZrO2 nanofibers for thermal insulation and sound absorption applications

Improved sound absorption performance of synthetic fiber materials for industrial noise reduction: a review

Acoustic Characteristics of Microcellular Foamed Ceramic Urethane

Preparation, mechanical, dielectric and microwave absorption properties of hierarchical porous SiCnw-Si3N4 composite ceramics

Enhancing thermal insulation and mechanical strength of porous ceramic through size-graded MA Hollow Spheres

Increased microwave absorption property of porous Si3N4 ceramics by loading polymer-derived SiCN for a multifunctional design