Abstract:A self-powered electromagnetic vibration suppression and absorption system integrated with a magnetorheological damper and a linear motor is designed to attenuate the negative effect of vertical vibration caused by the increased unsprung mass for in-wheel motor electric vehicles in this article. The magnetorheological damper is used as a suspension damper to suppress body vibration, and linear motor is used as a dynamic vibration absorber, namely, linear electromagnetic dynamic vibration absorber, to absorb tire vibration, and regenerates the vibration power to drive the magnetorheological damper, realizing self-power. Based on power flow theory, the power transfer mechanism of the vertical vibration for in-wheel motor electric vehicles and the regeneration potential are analyzed. The negative effect on the dynamic performance of in-wheel motor electric vehicles is analyzed through the root mean square of dynamic responses. Moreover, the specific structure scheme of the self-powered electromagnetic vibration suppression and absorption system is provided. The influence of system mass, stiffness, and damping of the linear electromagnetic dynamic vibration absorber on the dynamic performance is analyzed, and these parameters are optimized by particle swarm optimization. Simulation results show that in comparison with a passive damper, the self-powered electromagnetic vibration suppression and absorption system can reduce the body acceleration by 17.05%, which is better than the magnetorheological damper (10.08%). The self-powered electromagnetic vibration suppression and absorption system increases the tire dynamic load by 5.62%, but it is 8.68% less than the magnetorheological damper. Additionally, the regenerated power can offset the consumed power adequately to realize self-power. Finally, a bench test is conducted to verify the effectiveness and feasibility of the self-powered electromagnetic vibration suppression and absorption system.

ADRC Control of Electromagnetic Vibration in In-wheel Motor Considering Air Gap Eccentricity

Mechanism analysis and optimum control of negative airgap eccentricity effect for in-wheel switched reluctance motor driving system

Improved 2-Order Active Disturbance Rejection Control for PMSM

Experimental study on controlling actively wheel unbalance vibration

A novel control strategy for vibration reduction in the permanent magnet motor drive system with eccentric load

A Vibration Mitigation Approach for Inverter-fed Permanent Magnet Motor Drive System

Vertical vibration control to the in-wheel-motor electric vehicles with static eccentricity based on a reinforcement learning method

A Built-in Force Actuator for Active Unbalanced Vibration Control of Grinding Wheel

Improved Active Disturbance Rejection Control for Permanent Magnet Synchronous Motor

Active Disturbance Rejection Control for Electric Power Steering System with Assist Motor Variable Mode

Fault-Tolerant Control of Active Suspensions in In-Wheel Motor Driven Electric Vehicles

Design and experimental verification of self-powered electromagnetic vibration suppression and absorption system for in-wheel motor electric vehicles

Vibration Control of Car Body and Wheel Motions for In-Wheel Motor Vehicles Using Road Type Classification

Improved ADRC for a Maglev Planar Motor with a Concentric Winding Structure

Improving Vibration Performance of Electric Vehicles Based on In-Wheel Motor-Active Suspension System Via Robust Finite Frequency Control

Current Control Method of Vehicle Permanent Magnet Synchronous Motor Based on Active Disturbance Rejection Control

Direct Displacement Control of Rotor Eccentric for Bearingless Introduction Motor

Position Vibration Suppression of Servo Motor Based on Active Disturbance Rejection Control

Adaptive Control for Suspension System of In-Wheel Motor Vehicle with Magnetorheological Damper

Integrated skyhook vibration reduction control with active disturbance rejection decoupling for automotive semi-active suspension systems

In-wheel drive system design with dynamic vibration absorption based on the adaptive transmission mechanism