Abstract:The electric vehicles are fast developed as the demand for energy conservation and environment protection. The permanent magnet synchronous motors (PMSM) are widely used in electric vehicles because of their high efficiency. However, due to the DC/AC inverter with fixed switching frequency was used to drive the PMSM, high-frequency vibration and acoustic noise were generated in the PMSM. And the frequency at which vibration and noise are generated is related to the switching frequency of the inverter and its integral multiple. Spread spectrum theory shows that the energies of a fixed high-frequency spectrum can be distributed into a wide range of frequencies. Therefore the concentrated energies can be weakened. This theory can be complied with the PMSM control strategy to help to reduce the high-frequency vibration and noise. This paper presents control strategies with changing the switching frequency in order to reduce the vibration and noise of the electric motor. Firstly, four control strategies with different switching frequency: fixed switching frequency (FSF), periodic switching frequency (PSF), random switching frequency (RSF) and hybrid switching frequency (HSF) are modelled and simulated by MATLAB-Simulink. During this process of simulation, the influence from the modulate rate and spread width to the reduction of harmonic amplitude was detailedly analyzed. Secondly, these four control strategies are implemented by the dSPACE MicroAutoBoxIIfor the rapid control prototyping (RCP) test. Thirdly, the vibration and noise tests of the PMSM are complied in the semi-anechoic chamber using software and devices from the LMS Test. Lab. Finally, the results of simulation and tests are compared and analyzed. Based on the simulation and test results, these three optimized control strategies can suppress the high frequency current harmonic amplitude significantly and the noise and vibration reduction difference among them are not apparently. Comprehensive analysis shows that the random and hybrid switching frequency control strategy proves to achieve better the goal of reducing the amplitude of high-frequency vibration and noise.

A novel control strategy for vibration reduction in the permanent magnet motor drive system with eccentric load

A Vibration Mitigation Approach for Inverter-fed Permanent Magnet Motor Drive System

Analysis and Suppression of Rotor Eccentricity Effects on Fundamental Model Based Sensorless Control of Permanent Magnet Synchronous Machine

Sensorless interior permanent magnet synchronous motor control with rotational inertia adjustment

Sensorless Control Strategy of Novel Axially Magnetized Vernier Permanent-Magnet Machine

Real-time Rotor Eccentric Load Locating Based on Acceleration Sensor

Multiobjective Vibration Control for the Noncollocated Active Magnetic Bearings Flexible Rotor Systems

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Direct Displacement Control of Rotor Eccentric for Bearingless Introduction Motor

Mechanism analysis and optimum control of negative airgap eccentricity effect for in-wheel switched reluctance motor driving system

Multi-Objective Optimal Design of Μ–controller for Active Magnetic Bearing in High-Speed Motor

Current Compensation Control of Multiple Frequency Vibrations of the Rotor in Active Magnetic Bearing High Speed Motors

Novel Decoupling Control and Eigenstructure Assignment Strategies for Rigid Active Magnetic Bearing Rotor System

Vibration Suppression for Magnetically Levitated High-Speed Motors Based on Polarity Switching Tracking Filter and Disturbance Observer

On-line Identification Based Unbalance Vibration Control With Less Regard to Rotor Speed in Active Magnetic Bearings Supporting Rotor System

A Model-Free Control Method for Synchronous Vibration of Active Magnetic Bearing Rotor System

A Control Strategy for the Mitigation of Rotor Vibration in a Three Phase Induction Motor

Three Voltage Vector Duty Cycle Optimization Strategy of the Permanent Magnet Synchronous Motor Driving System for New Energy Electric Vehicles Based on Finite Set Model Predictive Control

Control of Interior Permanent Magnet Synchronous Motor Drives with Cyclic Fluctuating Load

The Control Strategy Research on Reduction of High-Frequency Noise and Vibration for Permanent Magnet Synchronous Motor

Position Tracking Control of PMSM Based on Fuzzy PID-Variable Structure Adaptive Control