Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. A simplified tire finite element model modeling and simulation method with high efficiency and accuracy is proposed to address the issues of poor efficiency and low accuracy in tire finite element simulation. Firstly, the detailed finite element model of the tire is established, and the viscoelastic material parameters are determined through theoretical analysis and simulation verification. Then, the Hyperelastic material parameters are obtained through cyclic Tensile testing, and finally, the static tire condition test verification is completed. Based on the established detailed finite element model of the tire, the influence of different rubber materials on the dynamic characteristics of the tire is studied. On this basis, simplified friction and structure models are proposed to complete the establishment of a simplified tire finite element model. The simulation results of lateral and longitudinal slip conditions are compared with experimental data by implanting a finite element friction model that considers slip velocity and contact pressure. Through simulation analysis, it was found that the tread compound has a significant impact on the dynamic characteristics of the tire, while other compounds have a relatively small impact. Simplifying the tire finite element model can significantly improve the efficiency of finite element simulation and reduce convergence issues. The comparison accuracy between the finite element model simulation results and experimental data is relatively high, with the average accuracy of longitudinal force, lateral force, and correction moment reaching 89%, 95%, and 81%, respectively. This verifies the correctness and effectiveness of the simplified tire finite element model modeling and simulation method. This method provides certain reference significance for improving the efficiency of tire finite element simulation and providing virtual matching between tires and the entire vehicle.

Prediction of Restriction Width of Carcass by Belts for Radial Tires:Theory,Experiment and Simulation

An Improved Method of Using Equilibrium Profile to Design Radial Tires

Influence of Belt Cord Angle on Radial Tire under Different Rolling States

Prediction of Deformation and Footprint of High-speed Rotating Radial Tires

Static Finite Element Analysis for Effect of Belt Angle on Radial Tire with Complex Tread Patterns

Finite Element Simulation of Radial Tire Building and Shaping Processes Using an Elasto-Viscoplastic Model

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

In-Plane Bending and Shear Deformation of Belt Contributions on Tire Cornering Stiffness Characteristics

Research on simplified tire finite element modeling and simulation method

Effect of Carcass Ply Turnup Angle on Mechanical Properties of Truck and Bus Radial Tire

Analysis and application of FEM in wrap of body belt of radial tire

Analysis of Vibration Characteristics and Influencing Factors of Complex Tread Pattern Tires Based on Finite Element Method

FEM ANALYSIS ON STANDING WAVES AND CRITICAL SPEED IN RADIAL TIRE CORD

Finite Element Analysis of the Influence of Rubber Materials Properties on the Bead Performance of Radial Tire

A novel theoretical model of tire in-plane dynamics on uneven roads and its experimental validation

Finite Element Analysis for Tread Wear of Radial Tire

Finite Element Modeling for Steel Cord Analysis in Radial Tires

Analysis of Extension Propagation Process of Interface Crack Between Belts of a Radial Tire Using a Finite Element Method

POSSIBILITIES FOR OPTIMAL DESIGN OF A CAR TIRE BASED ON A CRITERION OF SPATIAL STRENGTH BALANCE

FEA on the Belt Width of 11.00R20 TBR Tire

Tyre rolling kinematics and prediction of tyre forces and moments: Part II-simulation and experiment