Abstract:Concrete-filled steel tubular (CFST) columns have been extensively studied and widely used in practice. Existing research has shown that non-circular CFST columns is much less ductile than their circular counterparts, particularly when thin/high strength steel (HSS) tubes and high-strength concrete are used. To address this problem, a new form of CFST columns has recently been proposed by the first author. The new column consists of a steel tube filled with concrete that is confined with HSS spiral reinforcement typically with a yield stress exceeding 1000 MPa. These columns, referred to as confined concrete-filled steel tubular (CCFST) columns, also maintain the ease for connection to CFST or steel beams. This paper presents the results of a series of concentric axial compression tests on such columns of square cross-section to demonstrate their advantages. The experimental program included 13 CCFST columns, four CFST columns without internal spiral confinement, two hollow steel tube (HST) columns, and 11 circular HSS spiral-confined concrete columns. Three different compressive strengths and three HSS spiral pitches were examined in the experimental program. The CFST columns, HST columns, and HSS spiral-confined concrete columns were all tested under axial compression to gain a good understanding of the confinement mechanism in a CCFST column. The test results show that the new columns possess much greater ductility than those without internal spiral confinement, although the use of HSS spirals increases the steel volume by only a small percentage. It is also shown that the axial load-axial strain curve of a CCFST column can be conservatively predicted by summing the axial load-axial strain curves of the hollow steel tube without local buckling, the HSS spiral-confined concrete core, and the sandwiched concrete between the two.

Axial Compressive Behavior of Circular Composite Columns with External Confinement

Confined Concrete-Filled Tubular Columns

Numerical Investigation on Compressive Performance of CFST Columns with Encased Built-Up Lattice-Angles

Experimental Study on Axial Compressive Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Unified Compressive Strength Model for Axially Loaded Circular Composite Short Columns

Behavior of Eccentrically Loaded Large-Scale CFST Slender Columns with Latticed Annular Steel

Confining stress path-based compressive strength model of axially compressed circular concrete-filled double-skin steel tubular short columns

Combined Axial and Flexural Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Compressive behavior of concrete-filled steel tubular columns with internal high-strength steel spiral confinement

Theoretical model of circular concrete-filled aluminum alloy tubular short columns under axial compression

Axial Compressive Performance of Concrete-Filled Steel Tube Stub Columns with High-Strength Spiral Confined Concrete Core

Experimental and numerical studies of axially loaded square concrete‐encased concrete‐filled large‐diameter steel tubular short columns

Circular Concrete-Encased Concrete-Filled Steel Tube (cfst) Stub Columns Subjected to Axial Compression

An Experiment Study of Axial Compressive Strength of Concrete Filled Steel Tube Composite Columns

Axial Compressive Behaviour of Concrete-Filled Double-Tube Stub Columns with Stiffeners

Nonlinear Analysis and Design of Concrete-Filled Dual Steel Tubular Columns under Axial Loading

Strength, Stiffness and Ductility of Concrete-Filled Steel Columns under Axial Compression

Behavior of Circular-Steel-tube-confined Square CFST Short Columns under Axial Compression

Numerical Study on the Axial Compressive Behavior of Steel-Tube-Confined Concrete-Filled Steel Tubes

Experimental behavior of concrete-filled double-skin tubular columns with outer galvanized corrugated steel tubes under axial compression

Experimental study on high-strength concrete filled steel tube composite columns under axial compressive loading