Abstract:Twelve lightweight and corrosion-resistant concrete-filled double-skin tubular (CFDST) columns with outer galvanized corrugated steel tubes (CSTs) and inner flat carbon steel tubes were subjected to monotonic axial compression tests. Compared to a traditional CFDST column, a CFDST column with a CST as the outer tube can reduce the longitudinal stress transmitted by the steel and better provide hoop confinement for the sandwiched concrete. The key parameters were the hollow ratio ( χ ) and inner tube thickness ( t i ). The failure mode, axial load capacity, strain and ductility of specimens with different parameters were analysed. There was noticeable slippage at the lock seam of the CST under axial loading, which releases the CST and results in the relatively low strength and ductility of the specimens. Keeping other parameters constant, an increase in χ and a decrease in t i led to a reduction in the peak load ( N u ), strength index ( SI ) and ultimate strain ( ε cc ). On the other hand, the ductility index ( DI ) increased as χ and t i increased. The strain development of the outer CST in one corrugation period was nonuniform. The hoop strain ( ε ho ) dominated at the crest of the CST, while the vertical strain ( ε vo ) dominated at the trough. ε vo gradually decreased from the trough to the crest, whereas ε ho increased from the trough to the crest. The applicability of the current standard design code formulae and axial load capacity equations for circular CFDST columns was evaluated using a newly expanded database, and a satisfactory axial load capacity model for circular CFDST columns with outer CSTs was proposed.

Nonlinear Analysis and Design of Concrete-Filled Dual Steel Tubular Columns under Axial Loading

Analytical Studies of Concrete-Filled Circular Steel Tubes under Axial Compression

Analytical Study of Circular Concrete-Filled Steel Tube Stub Columns under Axial Compression

Behavior and Design of Slender Concrete-Filled Wide Rectangular Steel Tubular Columns under Axial Compression

Behavior and Design of Concrete-Filled Narrow Rectangular Steel Tubular (CFNRST) Stub Columns under Axial Compression

Numerical Analysis on Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns under Axial Compression

Numerical Investigation on Compressive Performance of CFST Columns with Encased Built-Up Lattice-Angles

Compressive Behavior and Design Calculations of CFST Slender Columns with Latticed Annular Steel Part

Behavior of Eccentrically Loaded Large-Scale CFST Slender Columns with Latticed Annular Steel

Combined Axial and Flexural Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Behavior and design of axially loaded square concrete-filled double steel tubular slender columns

Analysis and Design of Concrete-Filled Stiffened Thin-Walled Steel Tubular Columns under Axial Compression

Nonlinear analysis of concrete-filled square stainless steel stub columns under axial compression

Numerical investigation and design of concrete-filled double square steel tube columns under axial compression

Performance analysis and design of circular high‐strength concrete‐filled double‐skin aluminum tubular short columns under axial loading

Analytical Behavior of CFDST Stub Columns with External Stainless Steel Tubes under Axial Compression

Axial strength of concrete-filled double skin steel tubular (CFDST) columns with preload on steel tubes

Experimental and numerical studies of axially loaded square concrete‐encased concrete‐filled large‐diameter steel tubular short columns

Behaviour and Design Calculations on Very Slender Thin-Walled Cfst Columns

Behavior Analysis and Design of Concrete-Filled Steel Circular-Tube Short Columns Subjected to Axial Compression

Experimental behavior of concrete-filled double-skin tubular columns with outer galvanized corrugated steel tubes under axial compression