Abstract:The need for safe storage systems with a high energy density has increased the interest in high-voltage solid-state Li-metal batteries (LMBs). Solid-state electrolytes, as a key material for LMBs, must be stable against both high-voltage cathodes and Li anodes. However, the weak interfacial contact between the electrolytes and electrodes poses challenges in the practical applications of LMBs. In this study, a double-layered solid composite electrolyte (DLSCE) was synthesized by introducing an antioxidative poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP)-10 wt % Li1.3Al0.3Ti1.7(PO4)3 (LATP) to the cathode interface, whereas a lithium-friendly poly(oxyethylene) (PEO)-5 wt % LATP was made to come into contact with Li metal. Owing to the heterogeneous double-layered structure of the DLSCE, a high ionic transfer number (0.43), high ionic conductivity (1.49 × 10–4 S/cm), and a wide redox window (4.82 V) were obtained at ambient temperature. Moreover, the DLSCE showed excellent Li-metal stability, thereby enabling the Li–Li symmetric cells to stably run for over 600 h at 0.2 mA/cm2 with effective lithium dendrite inhibition. When paired with a high-voltage LiNi1/3Co1/3Mn1/3O2 cathode, the Li/DLSCE/NCM111 cell exhibited excellent electrochemical performance: long-term cyclability with 85% capacity retention could be conducted at 0.2C after 100 cycles corresponding to 100% Coulombic efficiencies.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22532?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22532</a>.EIS and FTIR spectra; SEM image and size distribution of pristine; the TG plot and DSC profiles; LSV curves and the schematic of the intermolecular-hydrogen-binding effect between PVDF-HFP and PEO membranes; voltage profiles of Li symmetrical cells; the lithium-metal surface before battery cycle and the cross-sectional images of the NCM111/DLSCE/Li cell after cycling; cycling performance of the NCM111/PVDF-HFP-10 wt % LATP/Li battery; and EIS of NCM111/Li cells before and after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22532/suppl_file/am0c22532_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Fabrication and electrochemical characterization of lithium metal battery using IL-based polymer electrolyte and Ni-rich NCA cathode

Enabling Scalable Polymer Electrolyte with Dual-Reinforced Stable Interface for 4.5 V Lithium-Metal Batteries.

Thin Solid Polymer Electrolyte with High‐Strength and Thermal‐Resistant via Incorporating Nanofibrous Polyimide Framework for Stable Lithium Batteries

Stable performance of an all-solid-state Li metal cell coupled with a high-voltage NCA cathode and ultra-high lithium content poly(ionic liquid)s-based polymer electrolyte

A High‐Performance Lithium Metal Battery with Ion‐Selective Nanofluidic Transport in a Conjugated Microporous Polymer Protective Layer

A Novel UV-Cured Semi-IPN Structure PEO@Nano-SiO2 Composite Polymer Electrolyte for Lithium Metal Batteries

High-performance lithium metal batteries with ultraconformal interfacial contacts of quasi-solid electrolyte to electrodes

Development of gel polymer electrolyte based on LiTFSI and EMIMFSI for application in rechargeable lithium metal battery with GO-LFP and NCA cathodes

PEO based polymer in plastic crystal electrolytes for room temperature high-voltage lithium metal batteries

An Intrinsically Nonflammable Electrolyte for Prominent‐Safety Lithium Metal Batteries with High Energy Density and Cycling Stability

Electrochemical Characteristics of a Polymer/Garnet Trilayer Composite Electrolyte for Solid-State Lithium-Metal Batteries

Double-Layered Multifunctional Composite Electrolytes for High-Voltage Solid-State Lithium-Metal Batteries

A Robust Dual‐Polymer@Inorganic Networks Composite Polymer Electrolyte Toward Ultra‐Long‐Life and High‐Voltage Li/Li‐Rich Metal Battery

Dual In Situ Polymerization Strategy Endowing Rapid Ion Transfer Capability of Polymer Electrolyte toward Ni‐Rich‐Based Lithium Metal Batteries

Rechargeable Lithium Metal Batteries with an In‐Built Solid‐State Polymer Electrolyte and a High Voltage/Loading Ni‐Rich Layered Cathode

Deciphering and Integrating Functionalized Side Chains for High Ion-Conductive Elastic Ternary Copolymer Solid-State Electrolytes for Safe Lithium Metal Batteries

Cation Vacancy-Boosted Lewis Acid–Base Interactions in a Polymer Electrolyte for High-Performance Lithium Metal Batteries

In Situ Formed Gel Polymer Electrolytes Enable Stable Solid Electrolyte Interface for High-Performance Lithium Metal Batteries

Rational Design of a Laminated Dual-Polymer/Polymer–Ceramic Composite Electrolyte for High-Voltage All-Solid-State Lithium Batteries

High-Performance Solid Lithium Metal Batteries Enabled by LiF/LiCl/LiIn Hybrid SEI via InCl3 -Driven In Situ Polymerization of 1,3-Dioxolane

Active-Site-Specific Structural Engineering Enabled Ultrahigh Rate Performance of the NaLi 3 Fe 3 (PO 4 ) 2 (P 2 O 7 ) Cathode for Lithium-Ion Batteries