A High‐Performance Lithium Metal Battery with Ion‐Selective Nanofluidic Transport in a Conjugated Microporous Polymer Protective Layer

Kun Zhang,Wei Liu,Yuliang Gao,Xiaowei Wang,Zhongxin Chen,Ruiqi Ning,Wei Yu,Runlai Li,Li Li,Xing Li,Kai Yuan,Li Ma,Nan Li,Chao Shen,Wei Huang,Keyu Xie,Kian Ping Loh

DOI: https://doi.org/10.1002/adma.202006323

IF: 29.4

2020-12-16

Advanced Materials

Abstract:<p>Lithium metal is the "holy grail" of anodes, capable of unlocking the full potential of cathodes in next‐generation batteries. However, the use of pure lithium anodes faces several challenges in terms of safety, cycle life, and rate capability. Herein, a solution‐processable conjugated microporous thermosetting polymer (CMP) is developed. The CMP can be further converted into a large‐scale membrane with nanofluidic channels (5–6 Å). These channels can serve as facile and selective Li‐ion diffusion pathways on the surfaces of lithium anodes, thereby ensuring stable lithium stripping/plating even at high areal current densities. CMP‐modified lithium anodes (CMP‐Li) exhibit cycle stability of 2550 h at an areal current density of 20 mA cm⁻². Furthermore, CMP is readily amenable to solution‐processing and spray coating, rendering it highly applicable to continuous roll‐to‐roll lithium metal treatment processes. Pouch cells with CMP‐Li as the anode and LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811) as the cathode exhibits a stable energy density of 400 Wh kg⁻¹.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to improve the performance of lithium - metal batteries (LMBs), especially in view of the challenges faced when pure lithium metal is used as an ideal negative electrode material. Specifically, the paper focuses on the following points:

1. **Lithium Dendrite Growth**: During the continuous lithium stripping/deposition process, the high reactivity between lithium metal and the electrolyte leads to the formation of lithium dendrites, which will not only cause capacity loss but may also lead to internal short - circuits, resulting in serious safety hazards.
2. **Formation of "Dead Lithium"**: During the lithium stripping/deposition process, a large amount of "dead lithium" will be formed, further exacerbating capacity loss.
3. **Interface Stability**: The dynamically unstable solid - electrolyte - interface (SEI) layer between lithium metal and the electrolyte leads to an increase in electrode polarization, especially at high current densities, which limits the rate performance of the battery.
4. **Diffusion Kinetics**: The slow diffusion kinetics at the interface between the planar lithium electrode and the electrolyte leads to high electrode polarization at high current densities, which limits the rate capability of the battery.

To address these challenges, the paper proposes a new strategy, that is, to construct a conjugated microporous polymer (CMP) protective layer with ion - selective nanofluidic transport channels on the lithium metal surface. This protective layer improves the performance of lithium - metal batteries in the following ways:

- **Inhibiting Lithium Dendrite Growth**: The nanofluidic channels in the CMP layer have negatively charged functional groups, which can accelerate the transport of lithium ions (Li\(^+\)) while repelling co - ions (such as PF\(_6^-\)), thereby effectively inhibiting the formation of lithium dendrites.
- **Improving Ion Transport Efficiency**: The size of the nanofluidic channels in the CMP layer is about 5 - 6 Å, close to the Debye length of lithium ions (about 3 Å), which helps to achieve efficient ion screening and transport and reduce electrode polarization.
- **Improving Cycling Stability**: The CMP - Li electrode exhibits a stable cycling performance of up to 2,550 hours at a high areal current density (20 mA cm\(^{-2}\)), which is significantly better than that of the bare lithium metal electrode.
- **Potential for Practical Applications**: The CMP layer can be prepared on a large scale by solution processing and spray - coating techniques, is suitable for continuous roll - to - roll lithium - metal processing processes, and has good scalability and lightweight characteristics.

In summary, this paper aims to solve the key problems of lithium - metal batteries in terms of safety, cycle life, and rate performance by developing a CMP protective layer with ion - selective nanofluidic transport channels, and promote the practical application of high - energy - density lithium - metal batteries.