Abstract:Exploring high performance solid electrolytes is essential for the practical application of solid-state lithium–metal batteries. Here, graphene oxide (GO) is employed to improve the electrochemical performance, thermal stability, and mechanical strength of the poly(ethylene oxide) (PEO) based electrolyte. The ionic conductivity of the hybrid electrolyte containing 1 wt % GO reaches 1.54 × 10–5 S cm–1 at 24 °C, which is 7 times that of the electrolyte without GO, and the activation energy decreases from 1.01 to 0.64 eV. It is found that GO can suppress the formation of crystalline nuclei of PEO, thus increase the amorphous regions, and improve the movement ability of the PEO segments. Importantly, GO-modified PEO electrolyte not only has a wide electrochemical window (∼5 V) but also increases the lithium ion migration number to 0.42. Taking advantage of the decent GO–PEO solid electrolyte, the symmetric Li/Li cell can stably cycle for 600 h with a very small overpotential (27 mV) at 0.1 mA cm–2, showing excellent performance in inhibiting lithium dendrites. Most importantly, the LiFePO4//GO–PEO//Li full battery also delivers superior cycle and rate properties, with an initial discharge capacity of 142 mAh g–1 at 0.5 C and 91% capacity retention after 100 cycles. Moreover, the full battery can stably cycle for more than 450 charge–discharge cycles at 1 C. It is anticipated that PEO polymer electrolyte modified by GO has great practical application potential.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00090?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00090</a>.Characterization of specific surface area of GO nanosheets; mechanical tensile properties of electrolyte at room temperature; impedance diagram of GO–PEO electrolyte at different temperatures; optical photograph of thermal stability of electrolyte; mechanical tensile properties of electrolyte at 60 °C; lithium ion migration number of PEO–LiTFSI electrolyte; lithium symmetrical battery cycling of PEO–LiTFSI electrolyte; SEM image of electrolyte after lithium symmetrical cycling test; charge–discharge curves of PEO–LiTFSI electrolyte; SEM image of PEO–LiTFSI full battery after cyclic charge and discharge test; thermal performance parameter table of polymer electrolyte; comparison table of main parameters of hybrid polymer solid electrolyte in this work and previous mainstream work (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00090/suppl_file/ae1c00090_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Development of gel polymer electrolyte based on LiTFSI and EMIMFSI for application in rechargeable lithium metal battery with GO-LFP and NCA cathodes

Electrochemical characterization of ionic liquid based gel polymer electrolyte for lithium battery application

A novel gel polymer electrolyte based on trimethylolpropane trimethylacrylate/ionic liquid via in situ thermal polymerization for lithium-ion batteries

An efficient way to achieve high ionic conductivity and electrochemical stability of safer nonaflate anion-based ionic liquid gel polymer electrolytes (ILGPEs) for rechargeable lithium ion batteries

The critical role of in-situ lithium fluoride in gel polymer electrolyte for high-performance rechargeable batteries

Preparation of gel polymer electrolyte with high lithium ion transference number using GO as filler and application in lithium battery

In Situ Formed Gel Polymer Electrolytes Enable Stable Solid Electrolyte Interface for High-Performance Lithium Metal Batteries

Supramolecular Network Structured Gel Polymer Electrolyte with High Ionic Conductivity for Lithium Metal Batteries

Flame Retardant and Stable Li1.5Al0.5Ge1.5(PO4)3-Supported Ionic Liquid Gel Polymer Electrolytes for High Safety Rechargeable Solid-State Lithium Metal Batteries

Advanced Semi-Interpenetrating Polymer Network Gel Electrolyte for Rechargeable Lithium Batteries

Dendrite-Free Solid-State Li Metal Batteries Enabled by Bifunctional Polymer Gel Electrolytes

Crosslinked Gel Polymer Electrolyte from Trimethylolpropane Triglycidyl Ether by In Situ Polymerization for Lithium-Ion Batteries

A graphene oxide and ionic liquid assisted anion-immobilized polymer electrolyte with high ionic conductivity for dendrite-free lithium metal batteries

Novel Cross-Linked Copolymer Gel Electrolyte Supported by Hydrophilic Polytetrafluoroethylene for Rechargeable Lithium Batteries

Synthesis and Characterization of Gel Polymer Electrolyte Based on Epoxy Group via Cationic Ring-Open Polymerization for Lithium-Ion Battery

Controlling the Potential of Affordable Quasi‐Solid Composite Gel Polymer Electrolytes for High‐Voltage Lithium‐Ion Batteries

Double-Network Polymer Electrolytes with Ionic Liquids for Lithium Metal Batteries

Graphene Oxide Enabled Flexible PEO-Based Solid Polymer Electrolyte for All-Solid-State Lithium Metal Battery

Preparation and Characterization of GG-LiCF3SO3-DMSO Gel Polymer Electrolyte for Potential Lithium-Ion Battery Application

Gel polymer electrolyte based on PVDF-HFP matrix composited with rGO-PEG-NH2 for high-performance lithium ion battery

Bifunctional TiO 2-X Nanofibers Enhanced Gel Polymer Electrolyte for High Performance Lithium Metal Batteries